Finishing the bath inside with your own hands

Internal arrangement of a bath is a special matter. In addition to the need to give a beautiful appearance to the floor, walls and ceiling, it is necessary to take into account safety issues due to the peculiarities of the atmosphere in the room. Finishing the bath inside with their own hands is simple, the main thing is to choose the right material. It should be resistant to hot air, have safe contact with the skin without the possibility of burns and have a nice appearance.

For this purpose, a wooden lining is best suited. For different rooms you can use excellent wood species. The cheapest material is pine, but it is best not to use it for a steam room, at a high temperature hot resin appears on the surface of the boards. The interior decoration of the steam room in the bath with their own hands is best done with linden or aspen. They have a pleasant aroma, beautiful appearance and are safe - do not cause burns.

Step-by-step finishing of the bath with your own hands

To perform the work you need:

Let's get to work.

  1. First, you need to post to the ceiling of the room.
  2. It is done by means of a roller, priming the surfaces of the steam room - ceiling, floor and walls to protect against fungus.
  3. Tile is put on the floor. The correctness of the masonry is checked using the level.
  4. A fan with a valve is installed, which does not let cold air from the street.
  5. You need to know how to begin finishing the bath with wood with your own hands. On the ceiling, the infrared level is repulsed and the crate is fastened with metal plates and rails. The walls are also made of wooden crate.
  6. The walls are insulated to provide heat leakage from the steam room. Between the slats laid minvata, fixed nails with a wide hat. Overlap the foil strips with a stapler. The joints are closed with foil tape.
  7. The walls of the steam room and the ceiling are covered with a lining. The boards are attached to each other by a joint in the joint with the help of small studs. Lights are installed on the ceiling. On the level with the help of racks the frame of the shelf is mounted.
  8. The shelves are hammered by racks, a small gap is left between them. Turning sites are laid out with corner slats. Narrow dies are nailed with a construction pistol.
  9. Screws are screwed on the back of the screws. The distance between them can be set with a standard pencil.
  10. Similarly, the whole shelves are hammered. On its edge, the perimeter ram is nailed.
  11. The shelf is additionally polished.
  12. The walls are covered with a special protection against moisture and mold.
  13. Finishing the steam room can be considered complete.
  14. A decorative illumination is inserted into the shelves under the bezel.

Sheathing of the sauna with wood is an ideal option. It easily absorbs and gives moisture, is environmentally friendly and safe for the human body. In addition, the wood has a pleasant aroma, which will contribute to complete relaxation and pleasant rest during the bath procedures. With a little effort, you can get a high-quality and durable coating for such a peculiar room.