It would seem a perfectly simple question, but it often quite often leads people into a stupor. Well, if your purchase is inserted into a solid solid frame with good staples or other devices. But how to hang a mirror without fastening, not all people know. The walls are also different. With gypsum board it is necessary to behave quite differently than with concrete partitions.
Where is it better to hang a mirror?
Many legends and folk beliefs claim that in these beautiful objects is important information for people. According to the feng shui, it is also strictly indicated where the mirror should be hung, and where it should not be fastened in any case. If you do not want energy to leave your house, then do not place it in front of the entrance. Attach it slightly to the side or at a slight angle, so that you can view your living rooms. Do not fix mirrors against the entrance to the bathroom. It is believed that water can also take energy and wealth out of the house. But you can stick it on the door of the toilet outside, and then this danger will not threaten you.
How to hang a mirror without a frame?
The best way is to make special holes in the product, but for this you need to be a little expert, knowing the skills of working with diamond drills. There are also special decorative fasteners, in which you can conveniently insert a mirror, but it's good if you have a concrete wall or a brick . In it, you can easily make holes and insert dowels. And if the sheet is made of drywall? Do not always provide an internal frame for fasteners when mounting? Another way how to hang a mirror on a drywall is a special mounting double-sided adhesive tape. It is perfect if the product is not too heavy. The most common way to install mirrors on a tile, gypsum board or other surface where drilling is impossible is liquid nails or glue for mirrors.
How to use glue for mirrors?
- Buy Hercul MIRROR Adhesive, TYTAN, K2 MEGA Mirror Adhesive or other similar preparation. If it is not in the tube, then use a spatula or other device.
- Mark the place where the mirror will be located, so as not to accidentally stain the excess surface.
- We put the composition on the wall.
- It will be necessary to put several "fat points" for reliable fastening.
- Remove gloves so as not to smear the mirror with the remnants of the working solution. (Photo 6)
- We glue our product on the wall. At this time, the mirror needs to be gently pressed and supported so that it clings to the biting substance.
- Mirror holds tight, so our task is successfully completed.
