Shower room

The shower has a refreshing and restorative effect when fatigue goes away with water. For comfortable procedures, a shower cabin is created, which combines elegance, practicality and convenience. Also, it is often designed in small bathrooms, in which there is no way to install a bath or shower .

Shower Enclosure Installation

The main elements of this design are the curtains and doors, which limit the shower area, and the drain pan, which prevents water from spreading through the floor. Shower enclosures for the bathroom are a fencing without the upper dome and the rear walls. The mixer is attached directly to the wall or ceiling of the bathroom. If desired, the space of the corner can be zoned using the built-in backlight.

Types of shower corners

Shower corners are divided into categories, depending on the availability of the pallet and its variety. Shower corners with a pallet assume the presence of a sanitary unit on the floor, designed to collect water in the corner and drain it into the sewer. It is made of acrylic, cast iron, ceramic, steel or artificial stone. The shape of the pallet can be different, depending on it and the appearance of the entire shower corner. The pallet can have legs, the profile for doors, caused by a design. Its shape is different - asymmetric, square, rectangular, oval, round in the center of the room, radiused in the corner.

Rectangular or square shower corners occupy more free space than rounded ones. Variants with sharp angles are more convenient to install in niches.

A shower corner with a deep (high) tray allows you to collect water and at the same time use the corner as a small bath or a basin with water if necessary. They are suitable for families with small children.

In a low shower corner, the pallet is practically at the level of the floor. It will suit those who do not want to step over the high side. Such fencing allows you to create a more open interior in the room, dissolve in space and emphasize the uniqueness of the internal contents of the bathroom.

In a shower corner without a shower tray, the walls are placed directly on the floor, in which a water outlet is installed at an angle. In this case, the space is devoid of flanks and elevations, this design in combination with transparent doors made of organic glass seems weightless and light. They harmoniously emphasize the beauty and simplicity of the lines in the bathroom. The floor is often laid out with ceramic tiles, it can be decorated with mosaic, patterns or patterns. The popularity of this option is explained by the fact that such a design can be manufactured to individual sizes.

Shower enclosures usually consist of fixed walls and opening doors, which occur swinging or sliding. Doors keep warm during bathing and do not allow water to spray on the floor. Swing models can be single- or double-leaf. Sliding move on the rollers along the guide profile, also have one or two leaflets.

Doors and walls are often made of a safe transparent, matte or tinted glass. With the enclosing walls you can experiment, use for this stone, wood, polymers. Even the old proven method from a conventional polyethylene curtain can be approached.

The shower corner will become one of the most practical elements of the bathroom. It takes up a minimum of space. And comfortable water procedures will help to quickly bring yourself to tone in the morning and it's nice to refresh yourself after a hard day's work.