PVC paneling in many ways looks very attractive. You can close all your numerous communications under them and easily mount all types of lamps on the ceilings. The design is quite decorative in appearance and very light, and the material itself does not suffer from fungus, moisture, temperature changes. No dirty or dusty work with solutions is unnecessary. In addition, this type of suspended ceiling allows you to conduct room insulation and install noise insulation .
How to make a ceiling from plastic panels?
- The walls of the loggia are already lined with PVC lining, it remains to finish the ceiling. First we make a frame from a wooden beam. On the perimeter of the room we set the slats, after making the markup at the chosen level.
- In this work, when you need a lot of screwing, it is advisable to use a convenient screwdriver.
- Next, we attach the cross bars, reinforcing the structure.
- Reiki we connect with each other self-tapping screws, creating a reliable frame. In the work you can use a metal profile. It does not deform under the influence of condensation and is ideal for rooms with a humid climate, for example in the bathroom or toilets.
- Next, we mount the longitudinal slats, to which later decorative panels will be attached.
- With a small width of our room, two longitudinal rails are sufficient. Usually the step between them should be up to 0.5 m to exclude the sagging of the lining material.
- Using a stapler, we fix the starting profile.
- There are several types of PVC profile - outer and inner corner, connecting, skirting ceiling, F - shaped. It will not always be necessary for you to purchase all these materials, much depends on the type of work performed. In the case of how to make a house a false ceiling made of plastic panels, a start profile is always required, and in some cases you have to buy several strips of a connecting profile.
- To cover the ceiling with a lining we took the waste material that was used to finish the walls. The marking was carried out, and further the jigsaw of PVC the canvas blossomed into the necessary pieces. )
- Insert short blanks into the starting profile easily and effortlessly.
- At the next stage, how to make the ceiling in the room with plastic panels, we again needed a stapler. We fix the canvas to the bars. You can use self-tapping screws with the press-screws, having previously made a hole in the plastic. Such fastening is made in the case of a metal frame or for reliability, when it is necessary to install long panels.
- The most problems are usually caused by the installation of the last band. It is almost always cut to a width of 1 mm less than the distance from the edge of the adjacent panel to the wall. Then insert the workpiece into the profile until it stops and gently push it backwards. It is desirable that it connects without a gap in the grooves with the adjacent panel. If the material is slippery and the work causes difficulties, then use a paint tape, for which it is more convenient to pull up the problem piece of plastic.
- Do not forget to make holes for wires and in places where the lamp is fastened.
- Install the lamps and screw the bulbs.
- Facing works on the loggia are finished. We hope that it became clear to you how to correctly and quickly make a ceiling from inexpensive and high-quality plastic panels.
The method of installation of PVC panels described by us is suitable for small rooms and quite suitable for even unskilled people who have experience with the simplest tools. Often it is this side of the issue that attracts home professionals, especially those who have problems with finances. In this paper, you do not need to invite an expensive master, all the main problems are easily solved on their own. If you study the technology and make all the simple calculations correctly, then in a short time the room will receive a new beautiful and practical ceiling, and you will be able to save a lot of money by installing the plastic panels yourself.