Wooden pavilions made of wood with own hands

Simple and comfortable pavilions are best suited for seclusion, tea drinking, reading books. In a strong heat there is no more comfortable room for summer rest. If it is spacious, then you can arrange gatherings, small feasts. In addition, the tasteful gazebo decorate the countryside quite well, sometimes even eclipsing the main building. Is it possible to erect such beauty in person, without involving a construction team of expensive professionals? A small master class will help highlight the most serious issues in this case.

How to build a wooden gazebo with your own hands?

  1. We choose the optimal location of the future building. The summerhouse, created by own hands from a tree , should stand in the most beautiful place of the manor. We make the marking under the columnar foundation. Tape or monolithic view of the foundation is stronger, but the structure will be light, there will not be a special load on the soil.
  2. Digging holes with a shovel.
  3. We fall asleep pits with sand, reinforce them with a grid. Then put the blocks on the concrete solution.
  4. Protect from moisture the wooden structure waterproofing, which we install from above on the concrete block.
  5. The lower strapping is made from a thick log (150x150 mm), treated with a high-quality biosecurity solution.
  6. It has previously been chosen grooves, so the elements of the structure fit tightly together.
  7. The base of the floor consists of a bar of 150x50 mm.
  8. A design was obtained from several cells measuring 4x4 m.
  9. On the vertical racks is all the same beam 150h150 mm. We put them through the exact level.
  10. We connect the racks to the base with corners.
  11. The frame is almost ready.
  12. Metal fasteners reliably connect all the blanks. Very soon, a simple gazebo, collected by hand from a tree, will be ready.
  13. We put the bar on top to connect the vertical supports.
  14. Here you can not do without a screwdriver or a good drill.
  15. The upper strapping is done with metal corners. It is necessary to twist many self-tapping screws, therefore, it is difficult to do this manually, but in the end we will get a strong construction.
  16. In addition, you need to install jumpers that can make any building much stronger.
  17. Gradually emerges the general appearance of a simple wooden gazebo, which is quickly created with their own hands. It will have four completely separate entrances.
  18. In the middle of the system we have a wooden square (torus) on the poles. It is necessary when creating the second tier of the roof.
  19. We fix the rafters to the torus.
  20. It turns out a kind of a tower of a bar of 15x150 mm.
  21. It is better to use factory connections for metal beams.
  22. Above, install a small pyramid.
  23. The rafters are covered from the outside with moisture-proof plywood.
  24. The roof came out of a four-tier, crowned with a small turret. The height of the wooden structure reached 5 meters.
  25. Paul is typing from the terrace board. Its composition is sawdust and polypropylene. Small gaps between them are created artificially. They do not interfere with walking and serve for ventilation.
  26. There is no splinter on such a board, and it practically does not burn out. The finished floor looks beautiful.
  27. For roofing we use bitumen shingles.
  28. All the wooden parts are covered with paint.
  29. Construction of a wooden pergola is finished.
  30. Decorating the construction with stylish curtains, we made a massive structure seemingly lighter and airy.