For each car enthusiast, the garage finish is an acute issue, because it should give a cozy and neat appearance to this room, and also correspond to the features of the building, taking into account its operational orientation. Then the building will not only be a safe hiding place for the car, but also a warm and comfortable workshop at any time of the year.
Decorating the garage facade
For facade cladding, inexpensive material is selected, which is not exposed to sunlight. Suitable types of exterior garage finish:
- Plaster + painting. This solution requires minimal investment. Modern plaster on the gypsum mixture is easy to paint in the right color. With the help of mineral composition it is possible to give the surface a beautiful textured surface.
- Garment finish siding is an inexpensive and practical solution. Planks are easy to install, have a wide range of colors. Vinyl siding is the most popular kind of material, it is easy to clean, not afraid of ultraviolet light, it has a low weight. Between the crate and the walls, the room can be insulated with hydro- and vapor insulation.
- Artificial stone or decorative brick. The cost of the material is high, but it is more reliable and the room with this finish looks solid. Stone or brick, you can draw some elements of the structure, combine them with plaster.
Than to finish walls in garage?
Building materials used for interior finishing of a garage must have the following characteristics:
- give the room a neat appearance;
- not absorb dirt;
- Do not skip unpleasant odors;
- do not burn;
- not to be exposed to chemical attack;
- easy to clean and clean.
Such an internal lining will guarantee a comfortable and safe stay of people in the room. By color, it is better to give preference to light, pastel shades that can hide the shortcomings of the coating and visually increase the space in the structure. Each type of material has its advantages and disadvantages, the level of financial costs.
Garage finish with corrugated board inside
Corrugated sheets of galvanized steel, covered with several paint and varnish layers, are widely used for the construction of street structures. The finishing of walls in the garage with corrugated board is attractive by the speed of installation, the ease of erection, the low cost of the material and its durability. The sheets are frost-resistant, non-flammable, retain the original beautiful look for a long time. They can be painted in any desired color. The disadvantages of corrugated board include deformation under mechanical action and low thermal conductivity, this construction is better insulated.
Garage with PVC paneling
The rapid finish of the garage with plastic panels is a popular option for the arrangement of such a premise, which does not require large financial costs. They are light, cheap, do not allow moisture, they are mounted without excess dust and dirt. Facing easily can perform even one person in a few hours, between the crate and walls it is better to put a heat insulator. For facing it is advisable to select a facade material - it is stronger and will last longer.
Plastic panels are not afraid of water, they allow to make a wet cleaning of the walls of the room from soot and dirt. Planks for cladding can be selected in the right color scheme, which is presented in a wide range. The wall finishing with PVC panels has its drawbacks - the material is not practical, it is sensitive to shocks and it is easy to damage.
Garage finish with lining
Another option for inexpensive lining is a lining made of natural wood. The material is attached to the crate vertically or horizontally. In the gap between the walls and the lining can be placed insulation material - polystyrene foam or mineral wool. For facing is offered a wide range of natural calm color shades and textured drawings.
The finish of the garage walls from the inside with wooden slats has advantages - the wood has frost resistance, ecological compatibility, is not afraid of mechanical influences, it keeps smells well. But it can be damaged by insects and flammable. Wood is hygroscopic, constant temperature fluctuations can lead to rotting of the surface. Coverage periodically have to be covered with antiseptics and fire retardants - impregnation from dampness, insects and possible fire.
Furnishing of the MDF garage
Deciding how to wall the walls in the garage, many choose their MDF panels. The price for this material is not high, it is mounted quickly, it is covered with a special laminated film, which gives it a beautiful texture, it can imitate wood and stone. Any contamination from the surface is easily removed with a damp cloth. But the material has drawbacks - it consists of shavings, therefore it is fire dangerous. In addition, MDF is covered with a water-repellent film, but for a premise with high humidity it is not prepared - they should be used in a dry and heated structure.
The floor in the garage
The material for the floor in the garage must be wear-resistant, able to withstand a large weight load, because the car weighs a lot, it will be on the surface for a long time. Preliminary waterproofing of the floor in the garage, made during the construction phase, will prevent the appearance of moisture in the room. It is produced by ramming the soil on the site. Then lay several layers of building materials - coarse-grained sand, three layers of geotextile, between which is laid hydro-and heat insulation.
Rubber floor in the garage
Modern rubber modules in the form of tiles are well suited for equipping a garage. The material is not afraid of mechanical loads, has high wear resistance, does not slip at any temperatures, is easy to clean. Rubber tiles can be glued to the surface or simply laid, by interlocking the modules with each other on the locking joints. The material is made of different thicknesses, it is easy to fit even on an uneven ground.
There are also rolls for styling, they are stretched according to the type of linoleum. Another version of the cladding is a filling floor for a garage from a liquid mixture, which includes rubber chips, various dyes, polyurethane glue. Pour it on concrete, tile, asphalt. The resulting seamless surface has a longer service life, withstands any stresses.
Concrete floor in the garage
If you need to trim the floor in the garage, the traditional option is a concrete screed. This coating is inexpensive and durable, it perfectly withstands hard operation. But it has some disadvantages - high dust generation and poor resistance to contamination. The upper layer of concrete is gradually abraded, cracked and crumbled, dirt absorbed by the coating, which contributes to the formation of an ugly plaque.
Protect the concrete base from destruction can be additional impregnations, they will have to cover the surface every 3 years. The best basis for a garage floor can be a smooth reinforced concrete slab in texture. But it is heavy, it needs to be laid directly on the base of the building, attracting construction equipment and a team of people at the stage of building the premises.
Wooden floor in the garage
Often, the garage is finished with wood. Wooden floors are characterized by high strength, durability and attractive appearance. They have the ability to keep heat well, unlike a concrete surface, which always remains cold. The boards are fixed on the lags, which contribute to a uniform distribution of the load on the surface.
The finish of the garage from the inside with wood assumes the use of coniferous wood from pine or spruce, they are inexpensive and wear-resistant. Oak floor is considered to be the strongest and will last longer than others. Wood before installation is treated with flame retardants - means to increase its fire resistance and antiseptic special compositions that prevent decay.
Tile for garage on the floor
Ceramic tiles perfectly meet the requirements that must be met when the garage is finished. It gives the surface accuracy, fireproof, water resistant, easy to clean using chemical and abrasive detergents. Correctly laid tiles are able to withstand large weight loads. For cladding the structure is better to use clinker or granite, they have high strength and a matte non-slip surface. The material is mounted on an ideally arranged screed, it is not cheap.
Decoration of the ceiling in the garage
Deciding how to trim the garage and its ceiling, it must be taken into account that the materials for the upper ceiling should have good strength, moisture resistance, and resist various evaporation. Before facing, experts recommend the surface to be insulated - make a frame of bars, fill the crate with mineral wool, foam. For additional protection from cold and moisture, foil polypropylene can be used, then the room temperature remains comfortable for a long time.
Stretch ceiling in the garage
Considering different options for finishing the garage, you can choose your choice on the stretch ceiling . It is a thin elastic film stretched under the ceiling, it is considered a beautiful and practical design for facing, which has a low weight. The glossy surface is able to visually expand the space of the room, and the matte surface perfectly imitates an ideally flat plane. Stretch ceilings are practical - they do not burn, they only melt, do not react with alkalis, any dirt from them can be washed off with modern detergents containing alcohol.
Suspended ceiling in the garage
A properly installed suspended ceiling will help prevent condensation in the room, mask communications and visible surface defects. It is easy to integrate spotlights. During installation, a frame made of light metal is created, which is lined with a finishing coat. This cladding does not entail large financial costs.
Popular garage trim options inside assume the covering of the suspension frame with materials such as plastic panels or plasterboard. PVC bars have a long service life, moisture-proof and are easily cleaned with detergent. Drywall is less resistant to water, its surface can only be wiped with a damp rag, cracks can form over time in the joints of the plates.
How to paint the ceiling in the garage?
Deciding how to trim the garage from the inside, its ceiling can be simply painted, if quality materials are applied outside, the insulation is made, and the surface itself is perfectly even. For reasons of practicality, it is worth choosing a silicone or silicate facade paint. It has good atmospheric stability, suitable for rooms with high humidity and temperature changes. The color should preferably be light (beige, white, blue), it will visually expand the space and increase its illumination.