If you ever come across the ceiling finish , you probably already had time to appreciate the variety of materials and design for moldings and cornices. The fillets for stretch ceilings are not just the completion of the finish, they mask the transition from the tension structure to the wall. Do not forget about the decorative moments that can significantly affect the overall appearance.
Ceiling fillets for stretch ceilings
Most often complete with a tension system are laconic types of fillet for the ceiling, which can be called a stub between the wall and the frame structure. They can be both flexible and rigid. Used very rarely. But decorative skirting boards and fillets for stretch ceilings are used actively and everywhere:
- least often choose foam because of its fragility and susceptibility to glues (a very bad feature is the ability of the foam to shrink in time and leave ugly gaps at the joints);
- where it is more convenient to work with polyurethane foam, although the cost is much higher, but there are no limitations in the choice of glue, and the flexibility of the material allows it to be used for curved parts of the room;
- a plastic fillet for the ceiling will be an excellent solution if you want to get an imitation of any surface, but in the work you should be as accurate as possible, since unevenness in the sections will damage the tension web.
| | |
| | |
| | |
Separately touch the issue of fillet for the ceiling with illumination. It's no secret that LED lighting around the perimeter at the moment keeps the palm of the championship among the types of lighting. There are two ways: they use a wide molding and put a backlight on it, or attach an additional bar. It is necessary to take into account a small gap for the ceiling and slats, if you plan a fillet with illumination. Thus, the decorative fillet not only gives the completed look of the whole structure, but also allows the designer to use non-standard approaches to lighting.