Modern furniture does not just look beautiful in the room and holds many things. This is a functional element that performs several tasks. Another feature of this design is that it allows you to store more furniture in a small room while still retaining precious square meters. In most cases, such tricks are used for small apartments and living rooms, which in combination are bedrooms. Put a full bed is not always convenient, and sleep on the couch - even that test for the back. The ideal solution in such cases is a closet-bed. It will be discussed in this article.
How to make furniture yourself?
The process of manufacturing furniture-transformer with your own hands the bed begins with sketches and selection of a place. In fact, these are two boxes, which are interconnected by a special mechanism and decorated with cabinet doors.
In the company where the LDPS is cut, you can order all the necessary details of the design, pick out the shade of veneer and the design of the cabinet's facade. As for the bed itself, it is possible to disassemble the old one or order a frame with lamellae without a mattress in the furniture factory. At what it is necessary to do it first of all, since it depends on the size of the bed frame that all other measurements and furniture location depend.
Externally, the design will look like an ordinary cabinet . If necessary, it drops and there is a large full bed in the room. Let's consider a step-by-step lesson of manufacturing furniture-transformer by own hands.
- As a basis, the author of the lesson suggests taking the orthopedic base of the bed. Sleeper 180 x 200 cm.
- We remove all lamellas from the base. Only the backbone should remain.
- The frame structure, which will hold all the weight, put on bars of 40 x 50 cm. Of course, you can try to take standard furniture legs instead of a bar, but they almost certainly will not stand that weight.
- On the preparations for the cabinet we mark out the seats for the side parts.
- Then we join the parts of the structure.
- At the end we fix the top panel.
- This is the frame of the entire closet-bed.
- We do our own furniture and fix it in the supporting wall.
- In the process of work, there will be a lot of dirt, so the lesson author advises to immediately use a vacuum cleaner and not leave behind a shaving and dust.
- Now we mount the frame of the bed, which we dismantled at the very beginning, with the help of the mechanism of raising the bed and gas springs.
- This node will withstand the greatest loads during operation. It is necessary to select the thickness of the sheet of particleboard according to these loads and to specify it with specialists at the stage of sketch and cutting.
- It's time to connect the two parts of the furniture base.
- After installation and jointing, it is necessary to strengthen the structure and return the lamellae to the place.
- The last stage of the master class, how to make furniture yourself, will be the fastening of the facade.
- According to the drawings, the facade of the furniture-transformer with its own hands has the simplest form. For the handle of the cabinet the bed is brought to a horizontal position. This part can be done at your discretion, the only condition - the facade should be combined with the furniture in the room, and the fittings and location of it are not so important.
- The cornice simultaneously performs the function of the foot of the bed. And the next bedside table holds bed linens. By the way, all the furniture in the room is made of the same material, and the design of the cabinet is laconic and stylish at the same time. As a result, furniture really takes up little space and becomes invisible.
- Here is a stylish and invisible furniture-transformer themselves turned out in the end.
