When buying shoes, it is important not just to put on a favorite pair and stand in it, but also walk a little in the shop. Then you can feel, whether the size is correctly chosen. And what to do when buying shoes is necessary without fitting (order through the online store )? In such situations, it is worth knowing how to correctly determine the size of shoes, as well as the size grid of the country and the specific manufacturer.
How to choose the right size of shoes - the basic system of sizes
The size is determined by two parameters: the width and length of the foot. But most often manufacturers specify only the distance from the heel to the most protruding finger. When buying shoes from a particular manufacturer, it is important not only to choose the right size of shoes, but also to know how to find it in the table. The matter is that for today there are several systems of calculation.
- According to the international system, all dimensions are in centimeters and are rounded to 0.5. How it works: you measure the length from the heel to the protruding finger, while standing on the floor. So it's easy to calculate the required size.
- The second system is European. It is also centimetric, along the length of the insole. Here the unit of measurement is the so-called stroke: this distance is 2/3 cm or 6.7 mm. Here the manufacturer will indicate not the length of the foot, but the length of the insole. As a rule, it is 1-1.5 cm longer. That's why there are more numbers in the European tables.
- The English system is calculated in inches. For the zero count, the newborn's leg is taken, where the length of the foot is 4 inches. Then the numbering should be every 1/3 of an inch or 8.5 mm.
- There is also an American system that looks like English. The difference is that here a smaller number is taken as the reference point, and the step remains the same in 1/3 of an inch.
- It is also important to know how to determine the Chinese size of shoes, because a single system is not there at all. Each manufacturer provides its own matching system. That's why it's best to indicate not your shoe size, but the length of the foot.
How to determine the American size of shoes?
If you know that you have difficulties with the selection of shoes because of a very wide or narrow foot, it is better to provide for this moment. Most often offer to determine the full size of footwear manufacturers of the US, because it takes into account the width of the foot.
The fact is that different manufacturers usually have their own peculiarities of sewing shoes. In such cases, it is not so difficult to determine the size of shoes, how to correctly guess the completeness. Usually the manufacturer indicates for which type of foot the one or the other pair is suitable. For example, you need to determine the American shoe size, taking into account the completeness, since the width of the leg is non-standard. To do this, you measure the length of the widest part. As a rule, this zone is located near the base of the fingers.
And how to determine the size of the US shoes will not be difficult, since there are special designations in individual tables where A denotes a narrow foot, and B and C are wide and very wide, respectively.
How to determine the size of shoes - a guide to action
So, you decided to order shoes without fitting. To do this, you need to do a few steps:
- stand on a sheet of paper and draw the tangent lines from the heel and the protruding finger (they should go parallel);
- Further we measure this segment between these lines and round to 0.5 cm;
- Now it remains only to look at the basic tables of the correspondence of the sizes, if the manufacturer does not attach his own;
- if necessary, we also measure the width of the foot.
And once again, we emphasize that it is always necessary to specify only the length of the foot in centimeters, then the probability of making mistakes decreases at times.
| | | |
| | | |
