To keep the room warm and improve sound insulation, you can enclose the front door. In addition, this padding will give the door a more decorative look. What can you do with a door? If you want to do it yourself, let's try to understand this issue.
For upholstery of the door, you can use dermantin or vinylskin, and for insulation - felt, cotton or foam rubber. In addition, for work you will need wire, small carnations or stapler with staples, decorative furniture nails. More decorative will look like a door studded with nails, the shade of which coincides with the color of the pens and locks.
How to envelop the door with dermantinom with your own hands?
For the upholstery of a metal door, the fabric will need about 10-15 cm more than the size of the door. For wood, except the main cut of dermantine, you will need additional strips of cloth about 15 cm wide for the rollers.
- First, let's look at how to enclose a wooden door that opens outward. For the convenience of work, the door can be removed from the hinges, but it is quite possible that this is not done. Unscrew locks, handles, a peephole and remove the old lining. From dermantinum it is necessary to cut out two striae, equal to the width of the door, and two - to its length. These will be rollers, which will close the gap between the box and the door leaf. Apply the stripes face to the door and fix them with a stapler.
- Then we apply a heater to the door and grab it with cloves or staples.
- Now take the dermantinum and attach it with nails in the upper corners. Make sure that the edges of the upholstery protrude beyond the door leaf evenly from all sides. After that, after stretching the fabric well, we nail it in the lower corners.
- Similarly, we nail the upholstery around the entire door perimeter. The fabric should not wrinkle and form wrinkles.
- Now we need to make cushions. On the beaten strips of artificial leather, you need to lay pieces of insulation about 10 cm wide. Close the resulting roller tightly by bending the ends of the dermantine inwards. At the edge of the bend, we beat the rollers with decorative nails.
- Cut through the holes for locks, handles and eyes, nailing their edges with nails. As practice shows, for greater attractiveness it is possible to enclose the door with dermantinom and decorate it with the help of drawings. They are made with decorative nails, connected together by a wire.
On the back of the door, the rollers should not be attached to the canvas, but to the door frame. Upholstery on the door itself should be tucked inside and nailed with decorative nails, placing them about a centimeter from the edge. So we found the answer to the question: how beautiful it is to encircle the door with dermantinom.