Modern panels for the socle came to replace the heavy and costly finish. Such material is actively used for plating the house and its foundation, facing gables, walls, decoration of front elements - entrance doors, porch. The buildings, finished with socle siding, look neater and more beautiful than others.
Facade panels for plinth - pros and cons
Facing panels for the base of the house - an innovative material, it includes several components that provide protection and durability of the building. Siding has many advantages, due to which it is gaining popularity:
- The building acquires an exquisite style.
- Strength, reliability in operation.
- Withstands severe climatic conditions - high humidity and temperature changes from -50 ° C to + 50 ° C.
- Resistant to mold and fungi.
- Does not lend itself to corrosion and decay.
- Withstands exploitation for up to 50 years, while retaining an attractive appearance.
- Requires minimal maintenance.
- Has a low weight and does not increase the load on the foundation.
- Easy to install.
- Has a low cost.
- A wide choice of colors and textures.
Disadvantages of the panels:
- The combustibility of polypropylene material, it is not recommended to install them on structures associated with fuel. In case of fire, the siding will melt, but will not allow the fire to go further.
- If the fixing is incorrect, the siding may crack.
Facing panels for socle
Facade panels for the base of the house are made of cast or pressed, can have different structures and mimic the surface of natural materials, such as brick, stone, board. Depending on the composition of which they are made, the siding is divided into polymer, metal and fiber cement. Each type of finishing has its advantages and disadvantages.
Plastic panels for the base of the house
In the production of plastic panels for the plinth, PVC (PVC) and acrylic plastics are used. They are great for protecting a wall heater in a ventilated facade, foundation finish. Plastic siding is lightweight, does not rot, passes moisture, does not deform. It does not emit harmful fumes and is not subject to combustion. PVC panels are inexpensive, durable, do not need care and periodic repairs.
The lining of the plinth with plastic panels is easily made independently, without the invitation of specialists. Thanks to the unique system of locks, finishing elements for corners, cornices, windows, the siding installation passes much faster than other finishes. A large selection of materials that imitate natural materials, allows you to design the building in any color and style.
Panels of artificial stone for socle
Facing panels for the plinth under the stone are made of cement with sand with the addition of mineral crumbs. In their production, dyes and forms are used that give the siding the necessary color and relief, imitating various natural materials - granite, marble, onyx, travertine, slate, sandstone. With the help of the material, you can make a smooth, torn, hewn or antique masonry. The magnificent view of the stone, reminiscent of the majestic country estates, will make the house truly beautiful.
The characteristics of the material are no different from natural analogues, this decoration attracts strength, moisture resistance, frost resistance, preserves heat. At the same time, the cost of decorative panels is much cheaper than natural stone. The material does not require special care, its installation can be done independently, observing a certain technology.
Sandwich panels for plinths
The socle sandwich panels are a modern, inexpensive and durable material for high-quality foundation warming. They consist of two layers of cement-containing slabs and a core of heat-insulating material - high-grade styrofoam, expanded polystyrene or mineral wool. They are assembled very quickly, there is no need for prior leveling of the surfaces - only the crate is needed.
Sandwich panels for the base of the house are characterized by high thermal insulation and noise absorption, withstand high frosts and temperature jumps, their operation life is 30-35 years without the need for restoration. They are fireproof, environmentally friendly, do not rot, have low thermal conductivity. The owners are attracted in this material low cost and excellent savings in heating the house.
Fiber cement panels for socle
Fibrocement siding is a new environmentally friendly material with considerable strength. Its noise-insulating qualities are superior to plastic and metal counterparts. Such siding is made of cement and cellulose fibers, its main advantages are frost resistance, durability, absence of corrosion and rot, non-flammability, resistance to burning and temperature changes.
The main disadvantage - high water absorption, so the finish of the socle with fiber-cement panels is made on the layer of moisture-proof film. Siding does not have lock joints, it is mounted lapped using self-tapping screws or metal plates. The outer coating is made using polyurethane, acrylic, possibly with the spraying of stone crumbs, due to this the lining can mimic various materials.
Stone panels for socle
The use of stone panels for the socle is a fashion trend in construction. Their texture has a complete resemblance to natural masonry, but such material is more affordable. The application of modern technology makes each stone in the panel unique, giving it its size, shape, color. The laying of the foundation can be supplemented by the cladding of some parts of the facade.
Decoration of the plinth with decorative panels looks realistic, there is no feeling of artificiality when looking at such a foundation. Plates have hidden edges, so the coating looks seamless. They do not burn out in the sun, they do not scratch, they suffer sharp fluctuations in temperature. In the future, the material requires a minimum of care - wet cleaning is enough to make it look great for a long time.
Clinker panels for socle
Modern clinker panels for the socle mimic a beautiful brickwork on the surface. They are the standard for frost resistance, fire resistance, water resistance, beauty. The upper decorative layer of the material is made of clinker tiles , it can create a neat glazed, embossed, rough or aged surface.
The color of the material is selected for the design of the house, the range is large - from dark brown, burgundy tones to sandy. Such panels are joined together by means of a system of thorns and grooves, this method provides high rigidity of the skin and its resistance to wind loads. Clinker facade panels for the base of the house are often made bilayer, using a heat insulator.
Polyurethane foam panels for plinths
Particular attention should be paid to polyurethane foam panels on the base of the house. They are made of cellular plastic with the addition of marble chips, which are rolled into the polymer at high temperature. Outwardly, the material can imitate many textures - stone, brick. It consists of cavities filled with air, has a top covering of tiles.
Plates have a light weight, withstand the natural disasters and humidity, durable and wear-resistant. Their fastening is made with the help of the system "groove" - "comb", competent installation provides the building with good ventilation. With this material, you can trim the most complex, even curvilinear surfaces. They can be cleaned with compressed air or a jet of steam.
Metal panels for socle
Metal facade panels for the base are made of aluminum or galvanized steel, on top of their surface is protected by a polymer layer. The outer layer of the siding is smooth, corrugated or with perforations. Such material is inexpensive, has a wide range of colors. It weighs little, is resistant to moisture and frost, and has high strength.
Metal panels for the plinth have the main advantage - fire resistance. To protect the iron surface from corrosion, it is treated with a double protection (polymer + zinc). The life of such products reaches 50 years. For their installation it is desirable to use the services of professionals, for installation it is necessary to produce qualitative marking, to build a horizontal profile, it is possible to supplement the finishing with thermal insulation.
Panels for socle with insulation
Insulated panels for the plinth - a great way to combine the lining and thermal insulation. They consist of two layers - decorative of stone tiles, bricks, other natural materials and foamed polyurethane, rolled with mineral crumb. There are many variations of colors and textures of thermopanels, they can imitate a beautiful masonry.
The plates are mounted using the system "comb" - "groove", high-precision connections do not allow the bridges to arise. Thermal panels can withstand temperature jumps from -50 ° С to + 110 ° С, have low thermal conductivity, do not absorb water, do not decay, fireproof, easy to clean. They are durable and serve up to 50 years. Their only drawback is the toxicity of some components.
Vinyl panels for socle
Façade vinyl panels for socle are made of polymers with the addition of modifiers, dyes and stabilizers. They can have different texture (smooth, relief) and shade, imitate brickwork, natural stones, even wood. Mounted siding to the aluminum profile, in cold latitudes under it is recommended to install a heater.
Decorative panels for the socle of vinyl are fireproof, waterproof. They do not rot, do not rust, do not burn out, the slats can be cut, they are easy to install and maintain. The service life of vinyl material is 30 years. There is a significant disadvantage - vinyl does not tolerate low temperatures and becomes fragile, a strong wind can cause the plates to crack from vibration.
How to install the facade panels on the plinth?
To make a foundation with plinth slabs you can do it yourself, for this you need to perform a few simple steps:
- The paneling of the plinth begins with the installation of the crate. On the foundation are mounted metal rails on the level, racks and plates.
- The outer corners of the foundation are screwed to the profile.
- The first panel is inserted into the corner, the plates are flush with the top guide screws.
- If necessary, only the lower part of the lining is cut.
- From the top on the plate is fixed the ebb to the wall on the dyed self-tapping screw. The joints are mounted at an angle.
- Skinning of architectural elements of the structure is made.