Plaster of "lamb"

To make the decoration of the wall less primitive is very simple. Decorative mixture like "lamb" will advantageously beat the surface, make it voluminous, hide the unevenness. The texture coating creates a rough layer due to the granularity of the mixture itself. Used for interior and exterior decoration.

Textured plaster "lamb": features

"Lamb" is characterized by good impact resistance, high frost resistance, resistance to climatic effects, ease of application. The material is considered environmentally safe: it contains quartz, marble, dolomite. In mixtures for outdoor use, special water-repellent components based on polymers are contained. An optimal microclimate is created in the room, condensation is prevented. The finished mixture is balanced in such a way that the plaster solution with the minerals during the mixing and application forms a single mass. Sand in a conventional cement-sand mortar can settle in a container. Minerals in the texture of plaster "lamb" retain their position until grasping and solidification. The consumption of dry matter per 1 square meter is 2-5 kg.

Application of decorative plaster "lamb"

Before applying the plaster, clean the working area of ​​loose layers, oily stains, paints. Pre-treatment with a primer is recommended. The range of use of inner and facade plaster of lamb is quite wide: it is applied to brick, concrete, gypsum plasterboard, cement-sand base.

The principle of mixing the finished mixture must fully comply with the instructions on the packaging. Pasty consistency is obtained through the attachment of an electric drill or a construction mixer. After mixing, allow the paste to steep for 5 minutes, then repeat mechanical stirring. On the surface the solution is applied with a trowel, a trowel made of stainless steel, leveled with a grater, spatula, rollers. Granules of minerals leave grooves that create decorative coating.

When mixing mortar, calculate its quantity so that the area covered at a time "reaches" the openings or areas with a different finish. Thus, you will avoid visible joints.