In the design of different rooms is best to use natural materials, but wood is expensive, so you need to look for other options. As an analogue that does not concede, and sometimes surpasses in properties, MDF panels can be finished. They have their pros and cons.
MDF panels - finishes
To produce this material, only natural components are taken: the ground wood fraction and the natural glue lignin. Panels are subjected to complex processing, which is performed under high pressure and at high temperatures, due to which there is a strong connection. This material has such advantages: environmental friendliness, high density, aesthetic design, well resists temperature and humidity changes.
In addition, it is universal, affordable and easy to install. As for the minuses, they are also available: it burns well and does not withstand mechanical damage. MDF panels for interior decoration can be as follows:
- Rack. The panels have a length of 2.5 to 3.8 m and a small width of 13 to 28 cm.
- Tiled. The panels have the shape of a square and the dimensions can be different 30-98 cm (one side). Thanks to this you can perform simple patterns on the walls and ceiling.
- Sheets. This option is suitable for finishing large areas indoors. The sheet has dimensions of 1.25 or 2.5 m.
It should be noted that if the basis of MDF panels is made according to the same scheme, the surface may be different:
- Veneered. As a decorative finish MDF panels use natural veneer. This coating looks like a natural tree. This option has the highest price.
- Laminated. The most popular option and for obtaining such a surface is often pasted with a melamine film. There are options, with the use of high-gloss film, which improves the appearance.
- Painted . Ordinary panels can be painted in different colors, but the simulation of the texture completely disappears.
Finishing the ceiling with MDF panels
To conduct the facing of the ceiling in different rooms, MDF panels can be used, the surface of which simulates wood or stone. They are simply to be taken care of and allowed to be installed in places with high humidity, but then buy materials impregnated with water repellent. Finishing an apartment with MDF panels does not require special effort and time, since they have on the one hand special grooves (grooves), in which the installation inserts the spikes located on the other side.
MDF doors paneling
If you need to pick up interior linens and the desired color was not in the palette of finished products, then it is worth choosing MDF paneling, the painting which gives additional strength and resistance to damage. This option has several advantages: environmental friendliness, strength and good sound insulation, which is important for doors. Finishing of the entrance door of MDF panels takes into account such features:
- If the surface is made of wood, then you must always remove the old coating. In addition, the slots and irregularities should be treated with putty or foam. To reduce the negative impact of moisture and dampness in the case of installing a metal door, you should apply an anti-corrosion agent.
- When finishing MDF panels, it is recommended to change the locks so that later there are no problems with opening the door.
- When decorating metal doors, it is necessary to make templates, which is important for cutting the panel itself, since it is difficult to get a neat and even line in the home.
- Finishing MDF panels with MDF panels means using the material in the color of the door itself to create a complete structure.
Finishing the arch with MDF panels
In building stores a wide range of arches made of MDF is presented, so that everyone can choose an acceptable option for their interior. What's important is that you can order non-standard models with different unusual details. Depending on the design of the arch are divided into two types:
- With angular filling. Convenient option in terms of installation, as there is no need to conduct any manipulations with the doorway.
- Without corner filling. In this case, a doorway is first arranged to perform the arch. Installation of the arch is carried out at the stage of repairing the premises.
Finishing the doorways of MDF panels is very simple, because the arches sell like a set of parts that are assembled as a designer. For the connection, glue and screws are used. The most important thing is to correctly measure, so that the chosen arch would fit perfectly under the opening. Installation is not difficult, so you can do everything yourself without a specialist.
Window decoration with MDF panels
During the complete replacement of window frames, there is a breach of the integrity of the openings, so it is important to take care of the inner lining. Carry it out after the foam has dried completely. For finishing the house MDF panels are used for their numerous advantages and in the case of window slopes noise insulation, waterproofing, protection from fungus and mold is important. You need to buy a panel with a stud / groove, and fix them with screws, which are screwed into the grooves.
Room decoration with MDF panels
If the selected material was selected for repair, several practical tips should be considered:
- You need to start with the preparation of the basics. To prevent fungus from forming on the surface of the walls, apply a primer that is able to penetrate deeply or impregnate surfaces.
- If the MDF paneling is carried out on the crate of wooden bars, then treat them with impregnations for wood to protect against moisture and pests. It is not necessary to spare the means for the design to last as long as possible.
- MDF wall panels do not need additional protection, but if it is carried out in places with high humidity, it is possible to additionally coat the surface with varnish. It will not spoil the appearance, but will form an additional protective layer from moisture and mechanical damage.
- It is important to pre-determine the finishing method, because the panels may differ in the configuration of the groove, which will cause a problem during the work.
Finishing the living room with MDF panels
Want to make repairs and get an original design, but do not spend a lot of money on finishing materials, then buy MDF panels that can mimic the cut of wood, stones and leather, but that's not the limit. MDF paneling can be carried out using sheet, tile or rack material, so that different results can be obtained. The market offers a rich selection of panels, that is, you can design in any style.
Separately, we should talk about new products, so, the design of MDF panels can be with photo printing, which is applied to the front surface. To protect the pattern, use a varnish that has a water repellent effect. Another newcomer is a panel with a 3d effect. In this case, different colors are applied to the finishing material to obtain three-dimensional geometric shapes, waves, relief and carving. This option is for those who like modern currents.
Finishing of kitchen walls with MDF panels
For this room, it is important that the material has a paint finish, a PFX film, plastic, veneer or an acrylic shell. This is to ensure that the panels are resistant to moisture and fungal lesions. Finishing the kitchen with MDF panels can be carried out in different ways:
- Full sheathing. If the kitchen does not have a huge area, then this version of the cladding is not suitable, because the room will look like a casket. In most cases, partial finishing is used, for example, the lining of the lower part of the walls.
- Finishing MDF panels of the dining area. Veneered or laminated type of material can be distinguished from the dining area. Thanks to this the room looks more original and cozy. You can take sheets to make a partition. An excellent and unusual solution - air partitions made with laser cutting.
- For the kitchen apron. For this situation, only moisture resistant panels are suitable, or the finish should be covered with a glass screen. Often used MDF-skins with a heat-resistant plastic coating, which not only resist moisture and elevated temperatures, but also have a wide range of decorative patterns.
Finishing the bedroom with MDF panels
MDF panels are not often used for facing the walls in the bedroom, but this finish has the right to exist, as this environmentally friendly material will create an original solution. Completely use them for decoration is not recommended, but as important accents, this is it. Popular wall paneling options MDF panels: you can decorate the wall near the bed and part of the ceiling or do them only the lower part of the wall.
Finishing of bathroom panels MDF
Although this material is also made of wood, it has a special protective layer to protect it from moisture. The panels differ in shape, thickness and size. Technological characteristics MDF allows you to mount them even in shower cabins, but for this, choose options that have a drop icon on the package. Furnishing an apartment with MDF panels offers great opportunities, because you can combine different types and shades of panels, getting original results.
Finishing the corridor with MDF panels
The walls in the hallway and corridor are more often subjected to different pollution. Finishing the hallway with MDF panels in this case is suitable as well as possible, as they repel dust and they can be washed, without fear of spoiling. For design, you can use both a combination of different types of MDF, as well as other materials. You can create solid walls with sheet panels, or mosaic compositions with tiled variants. Popular is the combination of wallpaper and panels in the corridor. In the same way, the MDF verandas can be trimmed with panels.
Finishing of the attic with MDF panels
If the house has an attic , then it must certainly be finished to be used as one more room. There can be a gym, an office, a place for rest and even a bedroom. For all these rooms are suitable MDF panels for interior decoration, and experts recommend combining them with other materials, for example, wallpaper, plaster or painting. It is important to pre-design to take into account the combination of materials and fabrics.
Finishing the toilet with MDF panels
For such a room you need to select the material that gives comfort and beauty, and yet it has the maximum practical qualities. An excellent solution - the options for finishing MDF panels, which meet the sanitary and hygienic standards. The frame, which will be created to fix the selected material, will help to hide communications. With the help of panels you can finish not only the walls, but also the ceiling.
Finishing loggia with MDF panels
Often for the balcony and loggia panels are used, which increase the heat and sound insulation and make the situation attractive. It is recommended to buy water-repellent varieties, so that the lining does not deteriorate. Interior finish of the balcony MDF panels means the creation of a frame and laying insulation to create a comfortable environment, and you could use the additional area with the benefit. There is another option - gluing the panels, but in this case a smooth surface is made of drywall.