How to install a toilet bowl with your own hands?

The question of how to install the toilet with your own hands becomes the most urgent during the overhaul or European renovation. If you decide to do a bathroom repair yourself, then it will not be superfluous to find information on how to change the plumbing yourself. Consider how to properly install the toilet.

Disassembly of the toilet bowl

So, you decided to replace the old toilet bowl with a new one. To begin, of course, it is necessary with the dismantling of the old toilet. The main thing is to make the entire process of dismantling as carefully as possible. Do not forcefully tear off the toilet, without taking out the bolts and tearing everything off the wall with meat. With this approach, you can spend a very long time tinkering with the work that you can do in much less time. Stages:

1. Drain the water from the barrel and disconnect the water supply. If the supply is flexible - unscrew and then disconnect it from the water supply. In the case of metal piping, cut off part of the pipe, then disassemble the threaded connections to the first one from the water supply side. The nut of the new flexible connection will be screwed to the first threaded joint.
2. Dismount the fixing to the floor. The toilet bowl can be bolted or cemented. In the first case, simply unscrew the bolts, in the second - break the cement or the toilet itself in the attachment points.
3. Gently, slowly, turn the toilet bowl back so that the water remaining in the cavities of the toilet bowl could drain.
4. Disconnect the socket. Corrugation is very easy to remove, but if the bell is made of cast iron or plastic - take out the toilet and disassemble the bell before the first joint.
5. Place the corrugation in the sewer socket. To understand how to install the corrugation on the toilet is very simple: put the fan tube on the toilet outlet, and put the other corrugated outfits on the drain of the sewer pipe. Enter the drains with a sealant. Open the entrance of the corrugation is best covered with a rag to avoid the spread of an unpleasant odor from the sewage system.
6. Prepare the floor to fix the new toilet. If the toilet was bolted and the floor is not severely damaged, then the new toilet bowl can be attached to the old place. If the toilet was attached to the floor with cement, then first clean the resulting after removing the toilet bowl groove from the cement. Then the floor needs to be leveled. This can be done with a thick solution or screed . The screed should dry well before it can hold the dowels firmly. It dries 1-3 days. The thick solution dries much faster.

Installation of a new toilet bowl

There are several standard stages of installing a new toilet bowl.

1. Attach the toilet seat to the attachment point.
2. Install the fastening screws.
3. Spread the toilet bowl with a sealant and coat the corrugation. Flexible threading screwed to the water pipe, and the second end - to the tank.
4. Open the water and check for leaks.

Kinds of toilet bowls

Manufacturers of sanitary ware supply a large number of modifications to the market, but, in general, they can be divided into 3 types:

• suspended toilet bowl;
• an adjoining toilet bowl;
• outdoor toilet.

A successful and space-saving solution is the installation of a hanging toilet. The answer to the question of how to install a hanging toilet is also very simple:

1. Screw the frame and drain tank to the wall.
2. Connect the water and sewage lines to the installed tank.
3. Tank the wall, thereby disguise the tank and communications.
4. Next, the wall is plastered or gypsum plasterboarded.

Exactly the same manipulations are applicable to how to install a wall toilet. If you decide to make a hanging toilet, then you will need to do such a thing as installing a toilet bowl with the installation.

Attached toilet bowls are floor structures without a tank. Before installing a toilet bowl, consider whether there is an urgent need for this. After all, in this case, when installing the toilet, the tank is installed behind the false wall or it is necessary to carve a niche in the wall for 20-25 cm. And to understand how to install the toilet bowl in this niche and make everything right yourself is not so simple.

Installation of a toilet bowl on a tile

Often the floor covering in the toilet is tile. There is a problem how to install a toilet bowl on the tile . It's not difficult, let's look at it step by step.

1. Install the toilet in the right place and check that it is level with the ceramic tile .
2. In the place of the fixing bushings make the markings.
3. Remove the toilet. Drill the drill with a drill in the tile drill the tile in the markings. It will be 2 holes.
4. Drill the concrete. The depth should be equal to the length of the dowels.
5. Clean the place of dust. Pour in the resulting holes glue for tile or sealant.
6. Insert the dowels into the holes until they stop.
7. Put the toilet bowl clearly on the holes. Insert the screws into the fixing bushings and tighten them as far as they will go.
8. Close the screws with the plugs. Remove dirt and dust.

A good idea is to install a crane in front of a new drain tank. Due to this, water can be blocked during repairs or a tank leak not in the whole apartment, but only in the toilet.