With the advent of increasingly mobile and smaller gadgets, stationary computers began to lose their relevance in the apartment interior. However, the question arises of what to do with cumbersome, but still working technique. In this regard, many are interested in how to make a TV from the monitor , because the first does not happen much and even if the house is available in each room, another one will not interfere with the dacha or in the garage .
How to make a TV from a computer monitor?
To do this, you need the monitor itself, the TV tuner, the plug, the power cord, the antenna plug and the piece of the antenna wire.
Stages of manufacture:
- Remove the stand and the rest of its support from the monitor. The vacated seat will be used to place the TV tuner. Under the upper edge of the tuner should be placed triangular stand, which will provide a more convenient supply and installation of wires, as well as the correct direction of the IR receiver on the tuner.
- Remove the main mounting of the monitor and pass the screeds into the remaining holes and secure the tuner case.
- Install on the monitor the back part of the wall mount and simultaneously insert under the screws pieces of plastic, which in the future will help secure the wires. To obtain plastic fasteners, you can use an ordinary bottle.
- For those who are interested in how to make a computer monitor a TV, extend the plug of the power supply unit of the tuner by means of wires and a heat shrinkable tube. Cut the monitor's supply wire, and use the power cable and plug to get the lead wire.
- In order to conveniently connect the television antenna wire, you can deduce a small section of the antenna wire from the tuner with a plug at the end and fix it with a plastic clip.
- The power supply of the tuner must be fixed with double-sided tape or glue.
- Connect the wires from the power supply unit of the tuner, the supplying power cable and the power supply wire of the monitor, and insulate and secure it with a plastic clip.
- It remains only to hang the wall part of the mount, hang the monitor and plug it into the network.
How else can you make a TV monitor without a system unit?
As a rule, most LCD monitors have an input-output interface called LVDS. By removing the cover from the monitor and exposing the insides, you can see that the connectors are on a separate board. Its connection to other internal elements provides a flexible loop that is similar to the IDE for hard drives. For those who doubt whether it is possible to make a TV from a monitor, it is worth throwing away doubts and purchasing an expansion board for this interface, which has a built-in video decoder. Such a device will make it possible to reproduce both analogue and digital television directly without the use of various prefixes and computers.
All that remains to be done is to carry the purchased board and monitor to the service center for the repair of such equipment and to take the already prepared TV. By connecting to it an antenna or a cable cable, you can use it for its intended purpose. Possessing the necessary knowledge and skills in the work of AV equipment, you can solder a new board yourself, although this process is tiring and long, but significantly saving money. It is necessary to take into account that the pinout will have to be searched for each specific model, and after that the case will be further developed, because the dimensions of the equipment will increase. In any case, you can get a ready-made TV and not spend money to buy it.