Pump for the well at the dacha

What is the main difficulty in choosing the unit precisely in country conditions? First, it is necessary to search for the optimal solution between the price and the required amount of water, namely, to choose a pump only for irrigation or full supply of water to the entire site. In addition, much will depend on the parameters of the well itself, the remaining criteria.

How to choose a pump for the well to the dacha?

First, let's look at the list of actions that will be mandatory before we go directly to the model selection. To decide which pump to buy for the well in the country , first answer the questions from the list below:

1. First of all, we determine the suitability of water for drinking or watering. This not only protects your family, but also prompts you to choose the right type of pump: not all of them can pump water with impurities, and the service life will depend directly on the quality of the water.
2. What kind of pump to buy for a well depends largely on the amount of water needed in the country. In other words, we need to determine the capacity of the unit, but here it is necessary to understand that the machinery can not always work at the limit. We need to decide first with the maximum amount of water consumed, and then choose the model of the pump, which will be approximately 10% higher than our maximum.
3. Choosing a pump for a well involves selecting a model for a dacha, depending on the season of use. Models for especially summer use are much more than year-round.
4. Finally, it is impossible to choose a pump for the well without taking depth into account, as it will become the basis for selecting the type for the dacha.

The best pump for a well in the country

All the first items are referred to as secondary or additional parameters, and the depth of the well is the main parameter when choosing the type of unit. So, let's move on to this issue.

The depth of the well is within 7-8 meters

Under such conditions, the surface model will suffice. In such equipment, a self-priming pump and an automation system are provided. Surface models are good in that their installation does not require the participation of a professional. It is enough to strictly follow all the steps in connecting the unit, monitor the working pressure and tightness of the working line.

The depth of the well is within 8-15 meters

When the depth exceeds 8 meters, surface models no longer cope. Here it is necessary to select submersible options. From submersible to the dacha we will choose centrifugal or vibrating pumps for the well. The choice is based on the type of soil and the strength of the well itself. The fact is that in the areas located on the so-called quicksand, from the vibrations the bottom can rise slightly and thereby reduce the volume of water. If the walls of the well are not strong enough or the structure itself is old, the vibrations will only accelerate the process of destruction. For such situations, only centrifugal models may be installed.

The installation of both types is exactly the same: you fasten it to the cable and lower it to the bottom of the well, or more exactly a meter from the bottom. Then, sand and other impurities will not be absorbed, capable of disabling equipment. The pump casing is often either stainless steel or polymer, not afraid of water. Of course, it turns out very simply, but only professionals need to work here, because the electrical cable and water are dangerous things.

The depth of the well is more than 15 meters

At such a depth for the well, it is necessary to look for a well-run pump to the dacha. Firstly, it is capable of supplying water from such a large depth. And secondly, such devices are not afraid of impurities and are able to pump water even with small debris. Some models are not afraid of pollution in the amount of 180 grams in one cubic meter of water.