Steam insulation for bath on the ceiling

The construction of a bath in houses and dachas of modern man is not uncommon. If you undertook the construction of such a building, it is likely that before you will be several tasks that will need to be resolved. One of the topical issues that most often interested people want to get a bath is a vapor barrier for the bath on the ceiling.

Such a premise can be attributed to the number of buildings with special arrangement and rules of use. Among the mandatory properties of the bath is the ability not to let, keep the heat in the room. This is an important condition for the bath, because it is the vapor barrier that will create the necessary microclimate in the room. And also the ability not to let heat affect the durability of the structure. Provided that the vapor barrier is not properly made, the steam will leave the room, and the humid heated air can deform the ceiling . Incorrectly produced insulation will lead to the fact that you will spend more time and fuel on heating the bath, and in the end, the operation of the room will become impossible. Therefore, the insulation of the ceiling and the vapor barrier of the bath are important aspects in the design and construction of such a room.

How to properly put a vapor barrier on the ceiling of the bath?

Next, we will consider step by step the process of laying the vapor barrier and get acquainted with the advice of specialists on how to correctly put the vaporization on the ceiling of the bath. Preliminary experts advise to pay attention to the type of roof, namely the presence or absence of an attic. In the event that in this room there is an attic or attic, the ceiling will be much less to let in wet steam, but this does not mean that you can not do a vapor barrier at all. Typically, for the insulation of the ceiling with the attic the same materials are used, but boards from the roof are recommended to cover with clay.

Find out which vapor barrier for the ceiling of the bath is the most effective, it is not so simple. We offer the most reliable ways.

1 option

  1. The wooden ceiling is covered with wooden boards, the thickness of which is not less than 5 cm. A vapor barrier made of foil or cardboard impregnated with linseed oil is laid on top of the boards.
  2. Then the ceiling is covered with clay, after drying, they begin to heat insulation.
  3. Then proceed to the installation of insulation. As a material for insulation, you can use mineral wool, foamed polypropylene, expanded clay, etc.
  4. On the heater, fix the flooring from the boards.

Option 2

  1. Shpuntovannye boards are sewn to the square beam.
  2. Preliminary boards should be treated with linseed oil in order to give the material water resistance.
  3. On top of the ceiling beams you need to lay the boards between which the gaps have to be processed.
  4. On top of the board you need to glue the roofing paper, foil or polyethylene.
  5. As a thermal insulation, sand is poured out on top of the vapor barrier. Of course, at the moment there are many more modern materials for thermal insulation, which you can also use. For example: mineral wool, expanded clay, polypropylene.
  6. If you use expanded clay or mineral wool, it is necessary to waterproof the ceiling with a polyethylene film, roofing paper or aluminum foil.

One of the important steps before putting a vapor barrier on the ceiling in a bath is antiseptic prevention. Processing of wooden materials will allow you to protect yourself from further problems. Choosing a heater, you can use special expensive materials, as well as natural tools - dry land, clay.