Wicker furniture from the vine

Such products will decorate any interior and bring a touch of comfort. You can make furniture from vines yourself, because you will need very few skills or skills.

How to weave furniture from the vine?

We suggest you weave such a useful and cute interior item as a coffee table.

  1. For work, we need to prepare six twigs of 15 cm and one 8 cm long.
  2. We fold three long blanks and lay the other three in the slit between them.
  3. For weaving, we need the number of twigs to be odd. For these purposes, we have prepared one short.
  4. The weaving of furniture from the vine will be performed with thirteen ends in the cross, each of which has the same length. Next, we begin gradually to braid it with thinner rods.
  5. On the reverse side, the blank looks like this.
  6. Wicker furniture from the vine in our case will have about 15 cm in diameter.
  7. This is how the work on the reverse side looks like at this stage.
  8. The next stage of the master class on how to make furniture from the vine, will be the removal of the sticking ends of the twigs and the extension of these side edges. These edges should be thicker and more massive, as they will be used as the basis of the carcass later on. Their diameter should be at least 5 mm.
  9. To insert the ribs into our workpiece, you need to make incisions along the oblique by three centimeters.
  10. Now we have already received 25 rays from the vine for weaving furniture. Try to arrange each of them at the same distance from each other.
  11. We continue to braid the frame until its diameter becomes sufficient. In our case, this will be a circle of 40 cm.
  12. Like last time, we need to remove the excess sticking parts of the vine.
  13. The edge of the base is braided by the method of braids and rods and we also intertwine with each other.
  14. Next, we need to bend the ribs and bind them together.
  15. We need to tie this bundle in such a way that they come together in a cone with a diameter of about 20 cm.
  16. We continue to braid the thin skeleton frame, gradually rising up.
  17. We reached the height, where the conic braid was 20 cm.
  18. Now we simply continue to braid our wire rods, moving upwards and forming a circle of 20 cm.
  19. So we need to go about 15 cm up.
  20. Since we need to weave furniture from the vine with convex parts, we will use this skeleton ring 30 cm.
  21. We braid the frame thus 5 cm upwards.
  22. Side view.
  23. The next stage in the manufacture of furniture from the vine with their own hands will be the table top. The principle of its weaving is no different from the foundation.
  24. Once you get a diameter of the tabletop 30 cm, it must be applied to the base and weave.
  25. As a result, we will get twice as many wire rods.
  26. As soon as the diameter of the table top reaches 60 cm, you can proceed to the final stage. Skeletal twigs weave the edge.
  27. Cut all the sticking edges of twigs and wicker furniture from the vines ready!

Such a thing will become a real design find and an excellent decoration of any room. The coffee table made by us in the interior of the living room will definitely take its place of honor, where it will please the eye not only to the guests, but also to remind of the able hands of the owner of the house.