Quite a lot of time we devote to the selection of external kitchen design . But in the process of operation, convenience largely depends on the competently selected internal filling. In this article, we'll look at how to choose the type of filling cabinets for the kitchen at different levels.
Filling of upper kitchen cabinets
As a rule, in the upper part we have hanging cabinets. Use for them the usual swinging doors is not very convenient. Today the system of hoisting mechanisms is increasingly being used. The doors in this case open horizontally.
The convenience of operation is that after the door is lifted, it remains in this position and does not fall down. After you get everything you need, just close the door.
Another very convenient option for internal filling of kitchen cabinets at height is the use of the so-called column . This device is specially designed for high cabinets. There you can place up to six baskets. For such a system, ball guides are used, which allow the baskets to be fully extended. They are arranged in such a way that you can fully see their contents and not look.
| | | |
Filling the lower cabinets for the kitchen
Currently, many furniture designers have abandoned the traditional dish dryer, which was previously located at the top. This is not the most convenient option, because today such dryers are located in the lower part. The design is very sturdy and you can place it as in the lower cabinets, so the drawers.
In the lower part and today try to arrange a storage system for cutlery. But today these are whole trays with compartments for each appliance, which you can order at your discretion at the stage of kitchen design.
The filling of kitchen cabinets has now become more rational. If earlier we almost did not use the place under the sink, today the designers have learned to place there a special retractable mesh design. As is known, there is usually very little space under the sink, and it is quite difficult to think what exactly it can be put there. Now, designers offer to use this space as effectively as possible due to the special shape of the box itself in the form of a letter P. At the same time, the system is fully extended and you can easily get items from the corner.
| | | |
Filling of corner kitchen cabinets
For a long time, the corner parts of the kitchen were not used at all. Today they are no less capacious than the usual closets. For internal filling of kitchen cabinets of this type came up with a special turning carousel. This system is a series of semicircular shelves, they rotate about the axis on which they are fixed. Such a merry-go-round can be mounted in the closet itself or attached to the facade of the kitchen, then it can be pulled out as the door is opened.
Specific magical angular systems today largely solve the problem of lack of space in small kitchens. They are used for cabinets with swing doors. Such systems bypass the capacity even carousel types. In this case, rectangular boxes are connected by means of a rotary mechanism, and the leading edge is fixed at the door itself. The basket-boxes are also of a mesh type, because the entire contents are clearly visible.
Separately it is necessary to stop on filling of kitchen cabinets in the form of bottles and boxes for garbage collection. The first system is a retractable mechanism very narrow, but rather tall. There you can arrange bottles with cleaning agents to isolate them from kitchen appliances or products. For garbage also came up with special retractable systems. When you open the door, the lid automatically rises, and the bucket itself extends. So you do not have to constantly wash your hands, so as not to stain the facade of the kitchen, which saves time.
| | | |
