How to make a plum in a bath?

The bath gives pleasure and thus does not harm to health, and on the contrary, only strengthens it. It is not difficult to equip the steam room on your own plot, but one of the main problems of construction is how to properly drain the water from the bath. If the liquid outlet is arranged with errors, the walls of the bath will be covered with mold. And then what good is the body talking about?

How correctly to make a plum in a bath with a drain hole?

The simplest and most common way to make a drain in a bath is to dig a drainage pit - a septic tank, from where the sewage will be sucked out by the sewer machine as it is filled. It is equipped not far from the bath, from which the liquid comes along an inclined pipe. The pit must be bricked and cemented. A more economical option is to use tires from automobile tires that overlap each other.

How to make a sink in a bath with soil filtration?

If there is a sewage system near your site, you can "catch two birds with one stone" - drain the sewage and carry out underground watering of the soil. To implement the method of soil filtration it will be necessary to use the help of specialists who will help organize the entire system around the site: a grid for catching large-sized waste, a filter layer, a distributing well and drainage pipes.

How to make a plum under a bath?

In addition to the standard method of a drainage pit and a technological one with soil filtration, there is one more option for equipping the drain - not at a distance from the bath, but directly below it. It is suitable for saunas from logs, which can be installed not on the usual foundation, but on piles in areas with sedimentary rocks or on steep gradients. Of course, it is more difficult to build such a steam room. But the simplicity of the plum on the face: flowing from the floor baths, sewage enter the sewage pit, and then into the drain pipe.

The main thing is how to make a sink in a bath on stilts, this

to build the right floor. It can be leaking. With this method, spread the boards in such a way that there is a distance of about 5 mm between them, where the water will flow into the drain. The underground must have an inclined surface, in which case the waste will flow out by itself.

Sewage can escape into the soil if a drainage is built under the sauna, along which the moisture will go to a nearby pond. If a drainage well is required, the space between the floor and the soil is covered with galvanized metal and insulated.