Removal of gel-varnish at home

Gel-varnishes are now widely used, characterized by long-lasting resistance, rich color and shine. However, despite its strength, the coating begins to crack over time. Therefore, many are interested in removing gel-lacquer at home. After all, you want to get rid of the cracked varnish immediately, and not everyone has the opportunity to go to a specialist.

Required Tools

When carrying out the procedure, you need to understand that working with this material is much more difficult than with the usual. After all, the gel is practically absorbed into the upper layer of the nail plate, because it is not necessary to rip it off, because of the probability of seriously damaging the nails.

For the implementation of the procedure, the following materials must be prepared:

Removal of gel-varnish at home

The process is carried out by the following stages:

  1. First, you should remove the gloss, passing the nail file on the nails. You do not need to press hard on the instrument. This step is skipped if shellac was applied.
  2. Hand grease any fat cream. This should protect the skin from the effects of acetone.
  3. The halves of the cotton discs are wetted in a prepared liquid and covered with a nail.
  4. Then the caps are made of foil, by wrapping each finger with it.
  5. After holding for about 10 minutes, the cap is removed and the wand is scraped coating. The procedure is done with each nail. It is important to remove the lacquer consistently, since when removing the foil you need to have time to clean the coating so that it does not freeze again.
  6. At the final stage, the hands are washed and processed with a nail file, giving the desired shape. When irregularities occur on the plates, they are carried out with a polishing nail file. After that, it is recommended to make an oil bath.

How much to keep the remover for gel-varnish?

In a situation where a special liquid is used, you can remove the caps in ten minutes. If a conventional liquid is used with the presence of acetone, then the time should be increased by 5-7 minutes. Also time increases in case of removal of a varnish of the sated colors.