Apron - this is part of the kitchen wall, located above the sink, stove and counter top. Above the apron is usually limited to hanging cabinets, so the width of the open space of the wall near the work area is quite narrow. The choice of the material of the apron is given increased attention, since it must protect the wall from food particles, splashes of fat and oil. In addition, the apron serves as one of the decorations of the work surface and plays a big role in the decor of the kitchen. Therefore, before customers there is a problem: what kind of apron for the kitchen to choose?
Experts distinguish several types of aprons, but the demand for apron for kitchen from MDF is in high demand. The panel is made of finely divided chips, which is pressed under pressure and temperature. The second valuable "ingredient" is the ligilin, which acts as a binding component. The MDF board can include other impurities that are safe for human health.
Properties of the apron from MDF
Before purchasing a MDF panel for the kitchen apron, you should study the material characteristics and the features of its installation. If these criteria coincide with your priority scale, then the wood plate can be safely ordered. The apron of pressed chips has the following positive qualities:
- low cost in comparison with other aprons;
- for installation you do not need to have experience and special equipment;
- MDF panel is attached to any surface, regardless of the finishing material;
- apron is easy to decorate with photo printing;
- Through it it is possible to lay ventilation and low-current electric networks;
- the material is easily transported.
Despite the impressive list of advantages, such aprons also have a number of shortcomings that will influence the decision in favor of this type of finishes. Here you can distinguish:
- Increased humidity and chemical reagents affect the appearance of the apron;
- the panel may catch fire and begin to emit dangerous substances;
- at times the plate moves away, swells, bends;
- limited choice of colors and textures.
Thus, it becomes clear that this option combines two qualities - accessibility and practicality.
Types of aprons for the kitchen
If you are determined to find out which apron for the kitchen is better, then you better consider several types of materials suitable for wall finishing in the kitchen. The most popular are the following types of finishes:
- Tiles . This is the most common material for the apron. It is distinguished by its exceptional practicality and richness of colors and decor. The tile is represented and imitation of wood, plastic and even metal.
- Skinali or glass apron . For production, a special tempered glass with high strength is used. The image is applied to the back of the panel, so it is not erased during operation.
- Metallic apron . It uses perfectly nasty stainless steel sheets or metal plates. The apron has a characteristic glossy gloss that nicely echoes with other metal parts (cranes, kitchen appliances).
- PVC panel . It is distinguished by heat resistance and strength. The only drawback - an apron made of plastic has joints that become noticeable under certain lighting conditions.
All these types of aprons significantly benefit from MDF panels due to its attractive appearance and richness of colors. However, their price is much higher than the apron of chip, and the installation involves preliminary treatment of the wall. MDF apron can be fastened to any surface and it is easy to change it in case it gets bored or slightly spoiled.
| | | |
| | | |
| | | |
