How to install a plastic window sill with your own hands?

Usually the windowsills are fastened to the place by professionals, the same brigade that installs plastic windows , but this work can be done independently. The occupation is quite possible for the owner of the house, who has a Bulgarian, a jigsaw, several simple construction tools and knows how to use a mounting foam.

How to install a plastic window sill?

1. Determine the length of the future window sill. This size is composed of several values. It is necessary to summarize the width of the window opening and the size of the allowances on both sides, which usually range from 10 cm to 30 cm, depending on the customer's desire.
2. Using the corner, we draw a line on the slopes to determine which part of the wall to remove.
3. With a Bulgarian we make a nail, cutting a corner, if it exists, and then we remove the excess brick and concrete with a chisel or a perforator.
4. We clean the surface of the garbage with a brush, removing all the dirt, fragments of concrete and dust.
5. There are several ways how to properly install the plastic windowsill at home. Much depends on the material used, because it can be glue, mortar or foam. In our case, we took foam for this job, so the work surface should be well moistened. It is best to treat the place of installation of the sill with impregnation.
6. To level the plane, we will have to use substrates of plastic, plasterboard, wood or other material and level. It is possible to mount the window sill not strictly horizontally, but with a slight slope up to 1 cm from the window, so that the condensate or spilled water drains out.
7. With one edge we start the window sill in the groove, move it to the right and gradually put it in place.
8. The product is fully in the groove of the window frame.
9. Next, align the edges so that the outlets are the same on both sides.
10. In the question of how to install the plastic window sill in the apartment, we came to the last stage. We set the balloon in the gun, shake it, and carefully blow out all the voids and grooves under the foam under our beautiful window sill.
11. We put a load on the sill so that it does not move upwards.
12. Protruding for the edge of the foam knife cut off, and then the wall can be puttyed and decorated with wallpaper.

You see that it is not difficult to install a plastic window sill in your apartment or private house with your own hands, our instructions will help you understand how quickly and correctly to do it. Successful repair !