How to level the ceiling indoors?

When capital or European-quality repair, the question always arises as to how to level the ceiling. You can, of course, hire a team of masters, but in this case you will not get as much positive and pleasure from the process and joy from the realization that such beauty is done by yourself.

If the walls can be made smooth and smooth relatively easily and quickly, then it is more difficult to understand how to properly level the ceiling, to work very carefully and very carefully.

Methods for leveling the ceiling

Choosing a way to level the ceiling in the apartment, you need based on his difference.

1. The maximum difference is more than 5 cm. In this case, it is necessary to apply a dry method of leveling, that is, to attach to the ceiling a structure made of gypsum fiber or gypsum board. How to level the ceiling with gypsum board we will consider below. In recent years, the finishing with stretch ceilings is very important.
2. The maximum drop in the ceiling is less than 5 cm. Here you can apply both dry and wet method. In the wet process, it is necessary first to plaster the uneven surface, then to putty with a special putty (several layers). After drying putty, you can paint the ceiling .
3. If you need to level the curve too high, it is only necessary to apply two different kinds of putty.
4. If the difference in the ceiling level is more than 2 cm, then after alignment with the putty, reinforcing mesh should be applied.

Ceiling leveling technology

1. Dismantle the old coating.
2. Determine the ceiling difference, for this we use the level.
3. Prepare the base of the ceiling, clean, sand and prime.

Master-class on leveling the ceiling with plasterboard

Consider how to level the concrete ceiling with gypsum board. Step-by-step instruction:

1. Acquire the necessary material, in this case it is drywall. There are two types of drywall: normal and water repellent. Water repellent plasterboard is often green and is used in the bathroom or in the kitchen. If you decide to make a suspended plasterboard ceiling in the bedroom, hallway or living room, then standard sheets of plasterboard (thickness 9.5 mm.) Will do for this purpose.
2. Before purchasing the material, you need to calculate exactly how much plasterboard you will need. To do this, you need to measure the ceiling area, draw a sketch of the future design and inscribe the parameters of all elements. Gypsum plasterboard sheet has standard parameters - width 120 cm, length - from 2 to 4 m.
3. Make a framework of metal profiles. The profiles are of two types: guides (2.7x2.8 cm) and rack mounts (6.0x2.7 cm), they have a standard length of three meters. Profiles are fastened together by means of special screws. You can do without a frame, in this case, drywall with mastic glued to the base. This method can only level out minor irregularities in the ceiling.
4. Attach the frame to the ceiling with hangers. They will allow to correctly adjust the position of the entire gypsum plasterboard structure along the height and the plane.

If you decide that you want to build a multi-level ceiling , be prepared for some difficulties. First, this process will take more time. Also, you need to think ahead of the whole design to the smallest detail, especially if it will be with figured elements. You also have to set the leveling level before mounting the structure itself.

Following these simple rules and showing a little patience, you can certainly make a plasterboard ceiling hanging by your own hands.

There are situations when it is necessary to repair the ceiling in an old private house with a wooden ceiling. The answer to the question of how to level the wooden ceiling is extremely simple - to putty. It is necessary to apply several layers.