How to put tiles in the bathroom?

It is likely that you thought that only the builders could put the tile on the floor in the bathroom, as it would take a lot of time to tinker with the markings and other moments. However, it's relatively easy to do this with your own hand. If you have a saw for a tile, you have at least once prevented the glutinous mixture for it, it will all work out.

How to put tiles in the bathroom?

1. First of all, we make all measurements. The fact is that the answer to the question of which wall in the bathroom to lay the tile, will depend on the location of the tile itself and the selected pattern. By the rules we move from the far wall in the direction of the door. The fact is that depending on which wall in the bathroom we will be laying the tile, the main picture will be seen as much as possible or not at all.
2. In our version, before laying the tile, we will level the floor in the bathroom by laying the base. With a saw, cut out the hole under the sink.
3. We lay our preparatory layer.
4. We lay out the tile, according to the chosen drawing.

If we start from the most surveyed edge, there will be whole elements. Closer elements will come closer to the door.

5. Next, we cut out a hole in the tiles for the drain part. As a result, before laying the tile, we completely laid out the picture in the bathroom and drove each element.
6. Do not forget about the spacers in the form of crosses to comply with the size of the seams.
7. So, we remove our layout and begin step by step to apply a not very thick layer of glue mixture.
8. When all the elements are in their place, we give the day for complete freezing of the floor.
9. When the floor is dry, you can dismantle our spacers-crosses and wipe the seams .
10. It is advisable to immediately remove the grout residue from the tiles so that the work is neat.
11. After complete drying, walk around the seams with a special sealer-sealant. He will not allow moisture to ruin your efforts, and the fungus to develop.