The external walls of the bath have been successfully built, but before the master, the task of selecting the material from which he will make the internal partitions of the baths appeared. It was built in olden times with only one premise, but now everything is done in a thorough and comfortable manner. I would like to have a comfortable dressing room, a locker room, a rest room. Particular attention is paid to what will be the partition in the bath from the bar between the steam room and the rest area. Heat should not leave the washing room, but the wall itself must be made of a safe material.
Partition in the log cabin
- Wooden partitions in the bath . Usually, single inner walls or double walls are made. It is necessary to take thick enough boards (about 50 mm), thin quickly will be shattered from surplus of a moisture. The best option is a skeleton partition in the bath. In this case, first the frame is built, one side of the wall is lined , the insulation is laid, and then the second wall is sheathed.
- Brick partition in the bath . Very often furnaces are located not in a therma, but in another room. Completely wooden make in this case the partitioning is problematic. Therefore, often the owners go in the simplest way, performing them entirely of stone or brick.
- Combined partitions . Again we are faced with the case where the furnace is located in a partition. The brick wall in the log cabin seems still an alien body and some users decided to combine. It is possible to lay a part of the partition, located on a distance that is dangerous from the firebox, with incombustible decorative material or a brick, and the rest - with a tree. Looks like this design is somewhat better. And if the stone part along the perimeter is selected with some decorative carved rod, then in general it will be a very original and attractive picture.
| | | |
| | | |
| | | |
