Beating the ceiling with your own hands

In our time, whitewashing the ceiling is not as common as before. Nevertheless, some conservative citizens still prefer it to her, especially in the interior of a country house .

Preparing the ceiling for whitewashing

First of all, you need to carefully inspect the front of the work and make notes in the places where it is worth doing modifications. Then, proceed to clean the ceiling of the previous paint. Usually in a bucket of warm water, at a temperature of about 30 ° C, about 3 tablespoons of soda ash are bred.

The resulting solution, using a sponge, soak the ceiling, gradually, in separate parts. Clear the ceiling from the swollen old whitewash with a spatula or a metal brush.

Spray gun for whitewashing ceilings

You can apply the paint manually (roller or maklovice), as well as using a pneumatic sprayer. In the second case, use a spray gun for whitewashing, with it, painting the ceiling will be much easier and faster. It has two bottles, the lower and the upper, in each of them the paint is supplied. For whitewashing the ceiling, it is more convenient to use the upper barrel. Applying an airbrush for whitewashing the ceiling, you increase the productivity and quality of work.

Before you start, you need to strain the whitewash so that the layer of paint falls more smoothly, and the hole in the nozzle, through which whitewash comes, is less often clogged.

For whitewashing ceilings with their own hands use:

If you need to paint a new ceiling, then for a good adhesion of the paint composition, it is better to treat the surface with a primer.

Using a spray gun for whitewashing the ceiling, provides a uniform application of the solution on the surface by smooth circular motions. For a high-quality coating, the spray nozzle should preferably be kept at a distance of 70-100 cm from the ceiling.

To hide small defects in the ceiling, you can apply 3-4 layers of paint. The first layer of white must be applied to the ceiling across the line of windows, the final one - along.

Whitewashing the ceiling with chalk

First you need to take 5 liters of warm water and dissolve in it 30 grams of carpentry glue. Then add to the resulting solution 3 kg of sifted chalk and 15-20 grams of blue to enhance whiteness. The resulting solution is enough to paint about 10-12 sq.m. the ceiling. When everything is ready, you can start working, with the solution you need to constantly mix. The first layer of whitewash is applied with a roller or brush, the second and third - with a spray gun. In this case, only small drops must reach the ceiling, otherwise there will be streaks.

Ceiling of the ceiling with lime

First you need to take 1 liter of water and dilute in it 2-3 kg of slaked lime. Then add 50-100 grams of pre-soaked salt, 400-500 grams of dye (if desired), 150-200 grams of aluminum alum. All this must be thoroughly mixed and added warm water. The solution must be brought to a volume of 10 liters.

To whitewash laid well and did not leave any stains, the wall should be moistened beforehand. To protect yourself from hitting chalk and small particles of lime, you should use a face mask, a moist face bandage or a respirator. Hands are usually protected with rubber gloves, and eye protection is worn.

Can I use water-based paint for the whitewash?

This modern dye, with it whitewash the ceiling is more qualitative, the layers lie evenly. To create different shades in this paint can add color pigments.

One of the most simple and inexpensive ways of decorating ceilings is to whitewash the ceiling with snow. When dry, it releases a minimum of harmful substances, creates a snow-white, matte, coating, allowing the walls to "breathe". In addition, this paint is resistant to dry erasing, therefore, will last longer.