The installation of the plastic window is considered incomplete, until its external finish - slopes and windowsill is not executed. Consider how to properly install the plastic window sill with your own hands. There are several ways of installation: on glue, foam, brackets or staples. Consider a common installation with foam.
Window sill installation
To do this, you will need:
- The finished window sill, its width is determined by the desire of the customer;
- Bulgarian;
- chisel;
- a hammer;
- primer and brush;
- gaskets;
- mounting foam;
- cargo.
Installation master class
- The window sill is perpendicular to the window. A line is marked in order to select the groove in the wall along the length into which the window sill will be inserted.
- For this, a Bulgarian, a chisel and a hammer are used.
- The surface under the windowsill and the groove in the profile must be cleaned from debris.
- The surface is treated with a primer.
- Before installing the window sill, the protective film is removed.
- The window sill is inserted into the groove gradually from the right edge to the left.
- The window sill should be installed at a right angle to the window. For this, a lining material is used. You can control with a square.
- Under the sill, the mounting foam from the gun with a long nozzle is blown out.
- From above the cargo is installed, so that the sill does not rise when the foam expands. The installation is complete.
After that, the foam is cut off from below, the surface shpaklyuetsya. After the final finishing of the walls, side plugs are installed.
As a rule, following all the steps, it is not difficult to mount the plastic window sill itself. He will perform an aesthetic role in the interior and protective.
