The table top is not only a cutting board, but also the entire headset. Having completed the installation of the countertop in the kitchen with your own hands, it will be possible to save considerably and make your room unique. You can buy it in the store and mount it yourself if you have small building skills. The easiest to install the worktop from the chipboard .
Mounting of table top
The installation of a countertop in the corner kitchen requires the presence of the necessary materials and tools:
- finished countertop;
- metallic profile;
- drill and screws;
- Ruler and pencil;
- Bulgarian;
- milling machine;
- bar with sandpaper;
- silicone;
- sealant;
- roulette;
- docking bar;
- a grill for the battery;
- connecting plates;
- wall curb.
- The table top is unpacked and checked for defects.
- The working surface is mounted on the frame of the table.
- Measures the length of the table top with the overlay panel.
- As a guide tire for trimming, you can use any metal profile fixed to 2-3 screws on the back of the chipboard.
- The required length of the table top is cut off on the metal guide.
- After the saw edge, the chipboard is processed by a bar with nazhdachka.
- A milling cutter is made for pipes if they are present in this section of the kitchen.
- In this design, the countertops are installed end to end. On the second part of the chipboard is made a cutout for the pipes and the windowsill.
- All sections are processed with silicone. This is necessary to protect the material from water.
- Both table tops are mounted on the table frame and are attached to it by screws.
- Dimensions are removed from the third section of the countertop, which will be installed at an angle.
- The length and width of the third part of the table top are cut off.
- The docking strap is also trimmed to the required length.
- The docking strap is attached to the end of the table top.
- Under the table there is a battery, therefore above it the metal lattice is established.
- The last part of the table top is attached to the frame.
- The corner joint of the countertops is fastened at the bottom by connecting plates.
- A wall curb is attached to the sealant and carnations.
- After installation of a sink and the built in technics kitchen will get the finished kind.
Self-installing table tops - the event is not too complicated. The result is an updated, attractive headset.
