The choice of material for finishing the balcony or balcony is not easy. The tree will not last long in the open air under wind, rain and frost. Profiled sheeting though also expensive, but serves till 50th years, and rigidity of a tin is well strengthened by corrugating. One drawback with him - the appearance of the corrugated board is more suitable for industrial facilities, although, of course, the choice is for the owner. In the case of how to sidewall the balcony , many of their choices are stopped on vinyl plastic panels. It is light, very easy to use, and is cheaper than alternative materials. We will tell a little about what problems the landlord will face when he starts to tile the balcony with his own hands.
How can I sew a balcony with a siding?
- First, remove the old guard from the bulgarian, clean the metal structures of rust and remove construction debris.
- If possible, restore the base of the balcony. Cracked joints should be carefully welded.
- We make measurements and cut for the crate beam.
- The wooden frame is attached to the metal railing. Vertical bar set about 40-60 cm.
- First cut into size the outer corner of the siding and the starting profile.
- We trim the balcony with our own hands. We fix the starting profile and the outer corner to the crate.
- The lower edge of the panel is set in the starting profile, the upper edge screwed to the crate screws.
- We set up the next panel, using the system of locks-latches, gradually sewing space with siding.
- The long front panel along the length is fixed to the vertical bars of the crate with self-tapping screws.
- Facing works with panels are finished. Now you can deal with the glazing of the structure, the arrangement of the visor, the insulation of the floor.
If a person is familiar with power tools and is a little familiar with the technology of work, then he will succeed. We hope that the sequence of works is clear and the problems with how to properly trim the siding with a balcony, you will not arise.