Motoblock is a universal equipment that can plow the land, hoe potatoes, fight weeds, harvest, etc. The cost of such equipment today is not very high, because it is very popular among amateur farmers. And most often the tiller produces just the plowing of the land. This procedure is simple, but knowing some features will not hurt.
How to plow a motoblock with a plow?
Before starting work, you need to hang on the motor-unit necessary equipment - plow and grouser. The latter are necessary for good adhesion to the ground, which in turn is important for creating the right traction effort. Gruntozatsepy should weigh enough that even an easy motoblock does not slip during operation.
When installing the plow, it is important to adjust it according to several parameters:
- width of plowing;
- in the depth of plowing;
- by the angle of the entrance to the earth.
If you are not used to plow the land, you can pull the cord for the landmark in front of the first groove. The straightness of the first furrow is important. Also, to facilitate the first plowing experience, you can make the first furrow of a shallow depth - about 10 cm.
It is advisable to plow virgin land with a plow or to prepare spring beds for planting in the spring. But since autumn it is better to plow with cutters, as they do not spoil the structure of the soil. The plow also turns the lower layers of the earth, while the fertile soil is piled down.
How to plow motoblock with cutters?
If you decide to plow the garden with a motor-block with milling cutters, then you will well swell the earth and soak it with oxygen. The soil after such treatment rises due to the formation of many lumps filled with air.
To prevent waves from forming during plowing, it is necessary to adjust the cutters horizontally. And in order that there is no caking of the earth, it is not recommended to re-process it, passing by the tiller a second time.
What if the truck breaks when it plows?
To a motor-block plow well, it is important to choose the right one
The correct position of the milling cutters is when the cutting part is directed forward, in the course of the motoblock movement. However, the motor block may break if the working part of the knives on the mills is sharp. Mills in this case do not loosen, and cut the ground. Motoblock will not move forward, but constantly burrow into the ground.