The toilet was clogged - how to clean it?

From time to time in the apartment there can be such a situation, as the obstruction of the liquid in the toilet. In this case, you need to take immediate action, as the apartment can be flooded with sewage, and leaking water can flood your neighbors from the bottom. So, what to do if there is a clog in the toilet, and how to prevent plugging in the plumbing in the future? About this below.

Why is the toilet clogged?

First, you need to understand the causes of the litter in the toilet. It can be:

• remnants of missing food;
• small debris left after repair;
• means of contraception and personal hygiene;
• accidentally dropped from a bucket rag or bast.

To prevent the toilet from clogging, do not throw objects into it that could lead to clogging.

Methods for cleaning the toilet bowl

So, how to clean the toilet, which is hammered? Experts advise to address one of the following methods of cleaning:

1. The Vantuz . With its help in the pipeline creates a high air pressure, which pushes the blockage into the sewer. Note that when using the plunger, the liquid level should be above the rubber tip, otherwise the work will be ineffective. If plumbing is connected by elastic corrugation, then most likely it will have to be removed for shaking the contaminants. When you connect the toilet bowl to the bell, you do not have to unscrew it - the clogging will get directly into the sewer.

Tip: if you do not have a plunger in your apartment, then you can use simple homemade tools. It can be a cropped plastic bottle, or a "doll-crush" made of a long stick and rag.

2. Plumbing cable or mandrel . A special product for cleaning sewer / water pipes. The cable is made of spring steel, which gives it the necessary rigidity and flexibility. To use the product is simple enough - you need to enter the end of the toilet string into the sewer pipe and begin to perform translational and rotational movements. When the clogging site is reached, debris is either pushed into the pipe or extracted with a hook in the form of a hook.

Tip: When working with a cable, watch its tensioned position, as when twisting, you can scratch the pipe wall.

3. Hot water a. Boil 10-12 liters of water and pour it into the toilet, creating a strong head. To do this, raise the pan / bucket in such a way that the liquid pours in at a right angle. If you notice that the water starts to slowly pass, then repeat the procedure again. Hot water can dissolve small clog and clean the toilet.
4. Soda . Dissolve in the toilet 250 grams of soda. As a result, an active alkali is formed, which will dissolve the blockage and relieve the lime scale. As a rule, soda helps if the blockage was small.
5. Household chemical goods . Today in stores you can find special products in the form of granules, liquids, powders and sprays, which allow you to quickly eliminate the unpleasant clogging. The most famous chemicals are solutions such as Tiret, Mole, Steril and Draano. To use a chemical is fairly simple - you need to pour the liquid into the drain hole and wait for the desired period of time (from 25 minutes to 7-8 hours). After that, the toilet should be thoroughly rinsed with hot water. Professionals are advised to use a chemical method of removing contaminants in the event that none of the physical methods help.

As you can see, there are a lot of ways to remove the blockage from the toilet bowl. Try to choose the most gentle method, which does not harm the plumber and will carefully remove the pollution.