How to clean the iron and not spoil it?

For each mistress it will be useful to know how to clean the iron on its own. There are a large number of methods, the effectiveness of which has already been tested by a huge number of people. For them, either special means are used, or what is at hand in every home.

How to clean the soleplate of the iron at home?

When choosing the method of cleaning the device, it is necessary to take into account the material from which the soleplate is made. For those who are interested in how to clean the iron from carbon deposits , if the sole is made of Teflon, ceramics or their combinations, you should know that in this case it is forbidden to use solid particles, as they can damage the surface and create scratches. If the sole is steel, titanium or covered with enamel or sapphire, then it is possible to apply more "hard" methods without fear.

How to clean the Teflon-coated iron sole?

If the sole has Teflon coating, then it should be taken into account that mechanical methods can not be used for its cleaning. There are several methods than cleaning the Teflon-coated iron:

1. First heat the appliance, and then rub its platform with soap. After it has cooled, remove it with a damp sponge.
2. A simple way how quickly to clean the iron with Teflon coating - use ammonia, in which you should moisten the napkin. Handle the platform of the heated appliance with it.

How do I clean the iron with a ceramic coating?

To remove dirt from the ceramic surface, you can use ammonia, hydrogen peroxide, acetic acid, soap, toothpaste and other methods, which will be discussed below. An effective way to clean ceramic iron sole is to use a special pencil. The procedure is very simple:

1. Preheat the iron and turn off the appliance. Pencil for cleaning the iron should be applied to the contaminated places. Keep in mind that during this time it will melt and an unpleasant smell will appear, as there are ammonia in the composition, so perform the procedure by opening the window.
2. Cleaning the iron ends with the removal of the remnants of the product with a simple rag. It is important during the treatment to try to avoid hitting the pencil in the cracks on the sole, otherwise the iron can deteriorate.

How do I clean the water tank in the iron?

Modern irons have a self-cleaning function, so there should be no problems with the removal of scale. In addition, there are other cleaning methods. There is a list of actions, how to clean the iron inside by self-cleaning:

1. Pour a full tank of boiled water. Set the device to maximum heat.
2. The iron must be heated and then allowed to cool. Repeat the manipulation several times.
3. Then hold the device over a wide container and press the self-cleaning button. Repeat the procedure is recommended several times.

How to clean the iron from the mold inside?

The methods for cleaning the "innards" of the device from mold are identical with the options used for descaling. Many will be surprised by the fact that ordinary mineral water effectively copes with pollution. To make sure of this, use the rules how to clean the iron at home:

1. Fill the mineral water in the reservoir, turn on the appliance to maximum and wait until it warms up.
2. Hold the iron over the sink or basin and press the steam highlight button several times.
3. To finish the procedure and make sure that the cleaning is carried out successfully, fill the tank with plain water, but boiled, and repeat the procedure.

How do I clean the steam iron from scaling?

Since in the water that is poured into the reservoir, there are salts of magnesium and calcium, then within a time the scum begins to form inside. It clogs the holes, which makes it difficult for the steam to escape and leads to spots on the clothes. If nothing is done, then in time the technician can fail. There are simple instructions how to clean the iron from scaling inside using citric acid:

1. First, prepare a solution for which you take a small spoonful of citric acid for a glass of boiling water. Stir until completely dissolved.
2. Pour the finished iron cleaner into a special container. Plug the appliance into the mains by setting the maximum temperature.
3. After that, turn it off and, holding it above any large capacity, press the button several times to select the steam. Different models, it is called in its own way.
4. Be sure to pour the remaining solution, and then pour in clean water and repeat all operations first. At the end of the procedure, wipe the surface with a natural cloth.
5. If the scum remains in the holes of the working surface, then make another portion of the solution, soak the gauze in it and put the iron on it for 5-10 minutes. After that, heat the device and iron it with a napkin.

The iron spits rust - how to clean it?

For internal cleaning of rust, you can use the methods presented above, but there is another option - the use of a special tool (decalciner). A popular drug is Antinakipin. Use the following rules how to clean the iron at home:

1. First dilute the product with water, taking into account the proportion of 2 tbsp. spoons for 200 ml of water. Pour the resulting solution into the iron reservoir.
2. Heat the iron, turn it off and leave it for half an hour. After that, heat it again and press the button for steam selection several times.
3. To finally clean the iron with holes, fill the tank with water to rinse it. Remains only to wipe the sole.

How can I clean the iron?

If you use the device, not observing the rules, then different contaminants may appear. Most often they occur when the temperature is not chosen correctly for different materials, which leads to the adherence of the tissue, limescale, mold and so on can also form. Sooner or later, everyone is facing such problems. There are many ways how to clean the iron from scale and other contaminants and here are some of them:

1. Well fights with contaminants ammonia alcohol, which should moisten a cloth and walk it over the surface. To enhance the effect, you can mix ammonia with vinegar.
2. Many years used to clean the candle from paraffin. Wrap it in a dense fabric and thoroughly rub the heated iron. It is important to keep the device tilted over the container to allow molten paraffin to flow into it. Do not allow paraffin to enter the steam holes, otherwise serious problems will occur.
3. Another simple method involves treating the heated iron with a hydroperite tablet. As a result, the dirt will peel off, and they will be very easy to clean with a normal rag. Please note that during the procedure, an unpleasant odor will be released, so open the window.

How to clean the iron with salt?

Immediately it is worth mentioning that this method can not be used for cleaning irons with a sensitive coating. There is a simple instruction how to clean the iron with salt:

1. On the board, spread the cotton cloth or towel, which will not be a pity to throw. Spread a large spoonful of salt on the fabric with a thin layer. It is best to use sea salt.
2. Turn on the iron to maximum. Be sure to turn off steam. Smooth the towel, avoiding strong pressure. As a result, the salt will darken, as it absorbs dirt.
3. If the procedure is effective, the surface will become shiny and all the dirt will go away. Determining how to clean the iron with salt, it is worth noting that instead of tissue you can use paper or newspaper, but do not hold the iron on it for long.

How to clean the iron with toothpaste?

Thinking, than still it is possible to clear a sole of an iron, craftsmen have decided to use a tooth-paste which perfectly removes a touch, and were not mistaken. It is better to choose the cheapest paste, because it has the most different chemical substances that can cope with pollution. If you are interested in how to clean the sole of an iron with folk remedies, then refer to the following instruction:

1. Turn on the iron and set the minimum heat. Note that the surface of the platform should be warm, not hot.
2. Turn off the device and, using an old toothbrush, apply stains on the stains and vigorously rub. When the main contamination is removed, it is recommended to treat the entire surface as a preventive measure.
3. Leave everything for half an hour, and then remove the rest of the paste with a napkin and warm water.

How to clean the iron with soda?

In the kitchen, one of the main assistants is soda, which will help clean up contamination not only from the dishes, but also from the soleplate of the iron. There are two ways how to clean the iron with soda:

1. The simplest option is to take a handful of soda and wrap it in a piece of gauze. The received bag should be carefully rubbed with a heated iron. According to reviews, the deposit is removed in a matter of minutes. This option is better not to use for Teflon coatings.
2. The next way, how easy it is to clean the iron, will take more time. Connect the soda with the existing dishwashing detergent to make a gruel. She needs to smear dirt and leave for 40 minutes. It will only be good to wash everything off.

How to clean the iron with vinegar?

Acetic acid well removes various impurities and can be used to make the sole of the iron clean. Cleaning of the iron with vinegar can be done as follows:

1. Take a hard rag and lightly moisten it in the vinegar, and then rub it heavily with dirty areas. Do not forget that vinegar is peculiar to evaporate, so you need to periodically re-wet. When the result is achieved, heat the iron and iron it with an unnecessary piece of cloth, soaked in plain water. Complete the procedure by wiping the soles with a dry cloth.
2. Cleaning of the iron from scale can be done with a solution of vinegar and salt. Preheat the vinegar, but do not bring it to a boil. Then add salt in equal proportions. Stir until dissolved, and when the solution has cooled, take a rag and wipe the dirty areas with it. It will only be ironed iron cloth, which will not be a pity to throw. It is possible to work out a hole with a ready solution, from which steam comes out, with cotton swabs.

How to clean the iron with hydrogen peroxide?

One of the most accessible assistants in the household is hydrogen peroxide. There are several rules on how to clean the iron at home:

1. It is important to do the cleaning by opening the window, since an unpleasant odor will be released. The device is plugged into the mains so that the sole heats up, but does not become hot.
2. Take a 3% remedy and moisten the cotton pad in it, and then process the problem areas.
3. When all dirt is gone, wipe the iron with a damp cloth.