Almost certainly each of us has a pair of jeans that are out of fashion or a little rubbed. To throw out or give it is a pity, but the thing collects in the closet. There is one great way to get your favorite pair of trousers in your wardrobe - to cut them into a skirt that you can combine and wear with a lot of things. In this article, we offer several different options, how you can change jeans into a skirt.
Denim skirt-maxi from old jeans
- To work will need two pairs of jeans.
- We open the step joints.
- At the first pair we cut off the upper part. Slightly below the back pocket.
- From the second pair we will make the basis. To do this, bend the front and back of the trousers in such a way that a triangle is obtained.
- We take one part from the first pair and put it inside.
- We roll the inner untreated edge, then poke it with pins.
- Be sure to pay attention to the hem. Its line should be smooth.
- Fix the bottom of the pins and level the hem.
- We check whether the edges are bent exactly, and we puncture them.
- This is how the skirt should look from the inside.
- We put everything to rest on the typewriter.
- We turn the product out and cut off the excess.
- Do the same in front.
- When both sides are ready, you can trim the product to the desired length.
- The skirt in the floor of jeans with your own hands is ready!
Mini skirt of old jeans
Now consider how to sew a short youth mini-skirt of jeans .
- We measure the length of the finished product.
- Cut and do not forget about the allowances.
- After you cut the bottom, you should get something like this.
- We open internal seams.
- This is what the procurement looks like at this stage.
- We dissipate further as much as before the lightning. We do it in front and behind.
- You should get the following.
- Next, just overlay one part on another and plot the line over the old one.
- Here is a fashionable skirt of old jeans turned out.
Skirt of old jeans with a pattern
You can only use the bottom part for sewing. Then get just a piece of cloth.
- Cut off the bottom and remove the hem.
- All we unpair and iron.
- The pattern of the skirt of jeans is very simple. We measure the waist circumference and the desired width at the bottom. Then divide all into equal segments and get a trapezoid. We apply a paper pattern to the fabric and cut it out.
- Now we are using the belt to get the gum in there.
- From the scraps we cut decorative elements.
- We fix them with a zigzag line.
- Done!
How can I just put jeans in a skirt?
Now consider another way. This is the simplest option, but it allows you to experiment with color and different tissues.
- We take a pair of old jeans trousers, bright fabric and thread in tone.
- We open the step joint.
- Fold and chop the edges with the pins.
- We put the contrasting fabric inside and draw the triangle with the chalk. Cut, adding a couple of centimeters.
- The edges are swept.
- We break everything with pins and we put it on the machine.
- You should get the following.
- The hem can be decorated with ruffs made from contrasting fabric.
- Here is such a bright summer skirt turned out.
How to sew a magnificent skirt of jeans?
For this method of alteration, only the top of the trousers will be needed. Also prepare several cuts of fabric for the bottom of the skirt.
- Divide the width of the product into several tiers according to its look and cut out strips of the necessary width from different sections of the fabric.
- In this lesson, the author proposes to do this with figured scissors, since the seams will be on the outside.
- Spread the strips in the desired sequence.
- We sew them together. It is necessary to step back a little from the edge so that the decorative cut is visible.
- When you bend the edges, be sure to straighten the seams.
- Then we slightly attach the top and sew it with the jeans.
- Done!