Kitchen in many houses is the main place where morning drinks of invigorating coffee or suppers are performed, when the whole family gathers at the table. Of course, I want this place to be cozy and very comfortable. To achieve this help various devices that help save space. This fully applies to the bracket for the microwave on the wall.
What does the microwave bracket look like?
The bracket for the microwave oven consists of two metal corners, on one side of which there are special mechanisms for secure attachment to the wall. At the top of the corners of the bracket put and fix the microwave itself.
Thus, the bracket for the microwave allows you to install the device wherever the dimensions of the kitchen allow and so that it is extremely convenient to use the oven.
How to choose a bracket for microwave?
There are several criteria that should be followed when choosing the right device for installing a microwave oven on a wall. One of the main is the depth of the microwave itself . Before buying it is worth to measure this figure by running a tape measure on the side of the front panel to the back, taking into account the bulging elements. Then, the length of the underside of the bracket is measured, to which the instrument will then be mounted. Ideally, it is necessary that the length of the bracket slightly exceeds the depth of the microwave.
Another criterion of choice is the weight at which crontshein is calculated. The weight of the microwave can be found in the technical data sheet. But do not forget to add weight to the containers and products that you will warm up.
Take into account the type of bracket . A fixed device, in which the length of the supports does not change, is cheaper. In models with a regulated length of supports to install a microwave oven will reliably be much easier. And if the solution is to change the microwave, you will not have to buy a new bracket.
If you have a single outlet - place the oven in the corner, pay attention to the corner
How to hang the microwave on the bracket?
When the place for installing the bracket will be successfully selected, it remains to drill holes with a drill or perforator where you plan to mount the corners. After that, plastic dowels are inserted there. Through special holes in the bracket insert metal hardware, which is then fastened with dowels. After carefully checking the strength of the structure, put a microwave oven on the skids. It should be located exactly and parallel to the floor.