Profiled sheeting for its high performance has long won the sympathy of developers. Each of us, not once, came across the neat fences of bright colors - green, brown, blue, light yellow, red. But ... A modern consumer is a person with high demands, who is interested in novelties in the construction market, also gravitating toward a taste for materials from natural raw materials or, at the very least, to their successful imitation. It is to meet the increased needs of the consumer, who, let's say, fed up with the uniformity of the colored corrugated board, and developed new versions of it, one of which is corrugated wood.
Corrugated board with a picture for a tree
In principle, the production of this kind of corrugated board does not differ from the production of a regular colored profiled sheet. But there are some differences, nevertheless. First of all, they are associated with a change in the technology of drawing a pattern that imitates a wooden surface. A method of photo-optic printing is applied followed by applying a transparent protective layer of a special material based on acrylic and polyvinyl fluoride (a polyester coating is used in the color proflist). But do not think that this kind of corrugated board is just as uniform as its color predecessor, by no means. A corrugated board for a tree has a large enough color choice, if one can say so. Prolists are produced with an imitation of a pattern and color palette for light and dark wood; oak gold and oak stained; pine, maple, cedar. In addition, the corrugated board for a tree can be one-sided (the pattern is applied only to the outside, and the rear surface is painted with beige or gray paint), bilateral and with a polymer coating on the back side. And since the sheets of corrugated board are most often used as constituent elements of a fence, then such a highly decorative variety is produced, like a corrugated board for a tree with a curved edge.
Decking under a tree for a house
As already mentioned above, a corrugated board for a tree is an excellent material for erecting fences or any other enclosing structures. And, with a sufficiently high external similarity with a natural wood fence , such a structure made from corrugated board has a number of significant advantages, the most important of which is that it does not need constant care (in tinting, for example). In addition, the fence made of corrugated board under a tree does not burn under the direct sunlight, it is resistant to atmospheric precipitation and even to the influence of an aggressive environment, for example, to the gassing of the air. For reference. At pre-sale tests the corrugated board under the tree showed high resistance to the action of salt water and acids.
And one more important advantage of the fence from the corrugated board under the tree, based on the dignity of the profiled sheet as a building material - is not subject to immediate ignition.
The external decorativeness of the corrugated board under the tree provided an opportunity to use it not only as a material for the construction of fences. Such sheets are perfect for mounting a fixed formwork or for covering a balcony . In addition, corrugated board for wood is also an excellent wall material. For example, it is possible to build a garage or an auxiliary building from this type of profilist, it is also suitable for interior and exterior wall finishing. The only difference between the wall profiled sheet is the height of its profile. Since the wall corrugated board under the tree does not bear such loads as the profiled sheet for the fences or the roof, the height of its profile (in fact - the ribs) ranges from 8 to 35 mm.
And, of course, the undoubted advantages of all types of profiled wood include their lower cost with a commensurate amount of natural wood.
| | |
| | |
| | |