Everyone should do his own business and usually solve all the issues related to technology, trust the man in the house. But no one says that a woman can not do this either. If you have instructions in your hands, you can solve this issue yourself. Below we will consider how to properly connect the antenna in the house.
How to connect a satellite dish?
The entire system for satellite television consists of several key components: a convector, a tuning cable with a receiver and a TV. Here are the basic steps that are standard.
- First we set the plate and the TV to its permanent place. Next, you need to connect the so-called coaxial tuning cable with the connector and the receiver. When screwing the connector connector, do not apply too much force, because the cable is taken by the tuning and then it should be replaced with a permanent one.
- Now we connect the receiver and TV with a low-frequency video-audio cable. In the absence of a low-frequency input, a high-frequency input is permissible, but a high-frequency modulator is also needed here. Then everything depends on how to connect the satellite dish: if you have a connection through an audio-video cable, then set the A / V mode, if this is an RF modulator, set the TV to its frequency.
- I managed to connect the antenna and now I can do the tuning. Its principle is no different from the setting of a conventional antenna. The only difference is that you connect a radio-frequency cable. Next, you need to rotate the mirror and thereby achieve the best image.
How to connect a common antenna?
Before you connect the antenna to the TV, you need to purchase a few details:
- connecting cable (usually SAT-50);
- F-nut and F-plug;
- special clips for fixing the cable.
Now it's more detailed how to connect not a room antenna to a TV, but a common one with the help of all this. To begin with, we extend from the room with the TV cable to the shield, it is usually either in the vestibule or on the platform near the stairs. Do not forget to secure the cable along the plinth. To connect the antenna, you still need about a meter of cable length margin.
Make an incision along the insulating material of the cable and remove about a centimeter, then bend and cut. Then we open the insulating central core. About half a centimeter of the central copper lived you enough to connect. Now the last step of the instruction is how to connect the antenna to the TV: you screw the F-nut onto the end of the wire and fix the entire structure in the cabinet on the splitter. The second end of the cable will be an F-plug that plugs into the TV socket.
Besides. you can not spend money on the purchase, but make an antenna for the TV yourself.