Skirt-polusolnce - the subject of women's wardrobe at all times. The skirt can be any length, enter the daily set or be part of the evening dress, have different variations in style. Moreover, a skirt-polusolnce suitable for any age: it is with pleasure to wear plump girls-preschools, shiny teenage girls, young skinny girls and grown-up ladies. To wear a skirt of this style can afford not only a slender, but also very corpulent woman. A semi-sunny skirt made of soft flowing fabric has a remarkable effect - it hides the excess fullness of the thighs.
The cutting of the skirt-half-sun is easy to produce, so you can cut it directly on the fabric. Yes, and sew a skirt-half-sunny hands on the strength of even a beginner seamstress.
Half-sunny skirt: cloth consumption
To calculate the consumption of matter, two measures should be taken: waist circumference (OT) and product length (CI). For an adult woman it is better to take a wide cloth, 140-150 cm in width, but you can take a narrower in width material, but then consider that the product will have more seams, however, this may add peculiarities to the traditional style. It is more convenient to build a pattern to take a square cut of matter with a size of 150x150 cm.
You will need:
- the matter from which the product will be made;
- tailor-meter tape;
- long ruler;
- scissors for sewing;
- tailor's chalk;
- needle, pins and threads;
- sewing machine;
- if you are planning an additional finish, you should pick up the accessories;
- iron with steamer.
How to cut a skirt half-sun?
Pattern skirt-half-sun with a belt or on an elastic band is made oblique. The fabric folds in half along an oblique line, while the corners are carefully combined. That the matter does not slip, the edges will be pinched. ΒΌ waist circumference is marked on the fabric. The white line on the diagram is the index of the fold of the fabric along the oblique, it should not be cut. Neatly rounded lines at the waist and hem are made, while allowances are made for the seams and the hem. Note that the length of the skirt will in any case be aligned when it is completely sewn, so it should be added to the length of the product at least 3 cm, and when cutting a skirt from a light fabric - 5 cm. The belt is cut out by the share thread. The width of the belt is made at will, the length is equal to the waist circumference with the addition of 3-4 cm.
Pattern of a skirt-half-sun in a floor
Fabric for a long skirt is laid out "face" down. Merka D in the diagram means the length of the skirt. Gradually moving the parts, you can cut a longer product, including a skirt to the floor.
Both parts are two halves of a half-sided skirt.
How to sew a skirt-half-sun?
When sewing a skirt-half-sun it is important not to rush, to perform all operations carefully. In the beginning, both halves of the product are sewn along the lateral seams, only then is the line sewn on the sewing machine. A belt is used (or an elastic band is inserted), the product is stripped at the seams. After that, the skirt should be worn with the undershirt (so that the side seams are located exactly at the sides at the waist) and ask another person to chart a new line of the bottom, given that the front and back of the skirt are somewhat sloping. For alignment, a long ruler is used, which is placed on the floor with one edge. The one who does the fitting, should turn, and the person performing the measurement makes the marks shallow right on the skirt. Now the skirt needs to be removed, neatly to connect marks and on the formed line to cut off superfluous matter.
As already noted, there are many modifications of this skirt style. You can make a skirt-half-sunny with folds, with a privatny belt, with flounces or ruffles. Making a pattern of a skirt-half-sun on a coquette, so that the coquette fits well on the hips, its pattern is built on the basis of a straight skirt - the upper part of the desired length is cut off.
| | |
| | |
Almost the same way, the skirt is also made in the sun .