Mouse pad for hands

Mousepads very quickly lose their appearance, because they are daily and very actively used. If you do not know what to replace it, then just make a homemade mouse pad with an individual design that is right for you.

The master classes presented in the article will teach you how to make a mouse pad with your own hands.

In fact, it's quite easy to do, only your imagination and any improvised means will be needed. It is very good to use HeatnBond - a fusible adhesive on a paper base, which uses an iron to glue two materials together. It can be replaced with conventional glue, only the gluing parts will need to be put under the press.

Master-class: how to make a mat under the mouse

It will take:

• circle of an old cork mat or foam for a craft;
• cloth with a pattern;
• scissors;
• HeatnBond;
• plate;
• iron.

1. We put together the fabric and HeatnBond, laying a round base on top, draw and cut.
2. Apply the adhesive material to the wrong side of the fabric and begin to iron the hot iron without steam, staying on each section for 2-3 seconds, until the entire surface is stuck.
3. When the material cools down, remove the paper substrate.
4. Adhesive side is applied to the basis of the rug and ironed before gluing.
5. If there is a special spray to protect the fabric, then you can cover the top of the mat with two layers.

Our mouse pad is ready!

Master class 2: mouse pad with monogram

It will take:

• wool felt (felt) pink and white;
• hole puncher;
• the big letter "a" printed out;
• HeatnBond;
• thread white, needle, scissors.

From the white fabric we cut out the letter "a" from the template.

1. Using a template for half of the rug, we cut out a wavy piece from a white fabric, and from a pink one a rectangle.
2. At the center of each wave of the white blank, make a circular hole.
3. Sew a letter for the edges in the middle of the pink rectangle.
4. With the help of a fusible adhesive on a paper basis, we glue two blanks. Our rug is ready!

Master class 3: mouse mat of unusual shape

It will take:

• eva-sheets;
• pencil, ruler, paper;
• knife;
• paint 3-4 colors and a brush;
• artistic adhesive tape;
• aerosol-sealant or finish coat.

1. On a sheet of paper, draw any shape and divide it into triangles.
2. With a knife we ​​cut out the foam shape.
3. With adhesive tape we separate areas that will be painted with different colors.
4. We color each sector in turn with each color, letting dry the previous one.
5. Cover the sealant in 4 layers.
6. Our bright geometric rug is ready.

Changing some details in the presented master classes, you can make a variety of rugs:

Any such hand-made cool mouse pad will be an excellent gift to a person who has a computer for any holiday.