How to make a paper machine?

Games can be used not only for entertainment, but also for development. It is for this purpose very often that parents with children make toys and various handicrafts with their own hands - panels, paintings, appliqués , cars , airplanes, weapons, doll houses and much more. It helps to develop imagination, fine motor skills and visual-figurative thinking among the guys. To such toys they are more careful.

Paper - this is a universal material, you can make almost any crafts from it, even an automaton, but how you will find out in our article.

How to make a machine from paper?

It will take:

• colored paper;
• scissors;
• glue;
• Scotch.

Progress:

1. We make 5 tubes 1-2 cm in diameter from paper of different colors. So that they do not unfold, we glue their end with glue.
2. We attach two of them to each of them. The blue is shortened by 5-7 cm.
3. We take a sheet of blue paper, wrap them three tubes stacked side by side, so that they calmly move, and fix.
4. We cut off the extra paper and make a rectangle out of it.
5. On the upper side of the received box we cut out a rectangular hole to the middle.
6. And on the brown part of one of the tubes make a hole, so that it is located in the second half of the box. Double pieces are joined together with adhesive tape.
7. On the side where the hole in the box is made, glue a small (up to 5 cm) lever to the middle tube located inside it.
8. We make the following tubular parts from colored paper.
9. Long parts are attached to the outer tubes, located in the box.
10. From the rest we make a butt and a sight, connecting them with transparent tape.
11. We make of a blue paper a rectangular box with an open top and fix it on the bottom tube of the butt.
12. To the middle tube, attach a long, and to it already a small funnel.
13. Cut out a rectangle of brown paper, and twist it as follows. These will be bullets.
14. The machine gun and shells are ready.

But the question immediately arises: how to shoot it? It's simple: we put the cartridge into the hole made in the middle tube, closes the gap, pushing the lever forward. Then we blow with all our might into the funnel made near the butt.

You can hide the projectiles at the bottom of the butt.

You can also make a machine from paper, using origami, but not some specific scheme, but individual elements of folding.

The automatic machine from a paper the hands

You will need:

• ordinary sheets of white paper;
• transparent scotch tape;
• scissors.

Progress:

1. Fold 2 sheets of paper and twist them into a tube 8-10 cm in diameter.
2. After bending four corners, we make a parallelepiped from it.
3. Cut the top corner on the left side, and on the side cut out the hole for the bolt.
4. Cut out from a double-folded sheet a strip a little wider than the palm. We twist it and flatten it a little so that the handle does not protrude from behind the body. Cut off its ends obliquely and tape. From the narrow strips of paper, we make the trigger and the safety clamp. Then they also attach them to the bottom with the help of an adhesive tape.
5. For the shutter, make a tube 2 cm in diameter and a rectangle, a little less than the body, and a length of 7-9 cm. Insert the tube inward and glue a rectangle to it to make it look out of the aperture for the bolt. To him then we glue a strip, folded at a right angle.
6. For the trunk we make 2 identical tubes and cut one of them in half. Bind from together. We make a short but wide tube, and then cut out on its side 2 rectangles.
7. We supplement the trunk with a thin tube and a jumper.
8. We connect the finished parts.
9. We make a parallelepiped, cut it into 5 parts and insert them into each other.
10. Attach it to the bottom of the bottom and the machine is ready.