All of us have long been accustomed to neat fences made from corrugated board , which have become an excellent substitute for traditional fences made of wood. And it's not surprising. Fence from the corrugated board does not need to periodically tint or replace rotted or leaky boards, it is not afraid of temperature changes and precipitation. But ... The uniformity of such fences is fed up, and how not to twist, but the natural tree remains a natural tree with its unique beauty and presentable. That is why the producers, trying to satisfy the market demand for building materials from natural raw materials or with their reliable imitation, created a new type of profiled sheeting - corrugated board with a "tree" surface.
Profiled with a picture of a tree
The producers took care of the fact that the corrugated wood under the tree did not suffer the same fate of the bored monotony as the colored corrugated board. For this purpose, we have developed and manufactured profiled sheets for wood that transmit the color and structure of various types of wood. Attention to the consumer is offered profiled sheeting for dark and light wood, for ordinary and alpine pine, for light and stained oak, as well as for maple, cedar, chestnut and other tree species. Moreover, the reliability of the transfer of the surface of a natural tree is so great that it is possible to determine the material of manufacture, for example, from a profiled sheet under a tree, from a very close distance. Speaking of fences. Since corrugated board is most often used for the erection of these enclosing structures, the producers additionally offer consumers a corrugated wood under a tree with a curly edge. In addition, the corrugated wood under the tree is produced with a one-sided drawing pattern - the front part of it imitates a tree of one or another breed, and the back side is painted in beige or light gray color; can be bilateral - both sides are made for a tree; and such, in which the back side has a polymer coating, the color of which is very precisely selected for the color of the title side.
Profiled wood ornamental
Since the externally profiled wood is highly decorative, besides it has excellent operational characteristics, it is used with equal pleasure not only for erecting fences - they can be walled, both inside and outside the room; erect small buildings such as garages or any podsobok; Use for installation of non-assembled formwork. In some cases, the corrugated wood under the tree is even used as a roofing material. It should also be said that the use of a special drawing technology (offset printing with subsequent coating of the protective layer) allows the woodcutter to use extensively for plating, for example, balconies, verandas or gazebos, without fearing that over time the coating will lose its decorative and external attractiveness - this material does not completely burn out under the influence of even direct sunlight, it is inert to unfavorable and aggressive components of the external environment. You can not ignore such an important feature of the proflist, which distinguishes it from a natural tree, as high fire resistance.
Choosing a corrugated sheet for a tree for this or that purpose, pay attention to the fact that the height of the profile on different sheets can have different indicators. This is due to the fact that the corrugated board, which is used as a facing material (wall), does not bear such large loads as the corrugated sheet intended for erecting fences. Therefore, it does not have such a profound profile (strictly speaking, these are the same stiffeners) in comparison with the profiled sheet for fences.
| | | |
| | | |
| | | |
