Stand for your phone with your own hands

When the house has lovely cozy little things, it helps create an atmosphere of warmth. To do something interesting and useful at the same time is not so difficult. Today almost everyone has a mobile phone. Upon returning home, we most often put it on the table. It happens that we do not notice and throw on top of paper or other things, and sometimes we do lose it on the desktop. Stand for a phone with your own hands solves two problems at once: you can always allocate space for your phone and design your own.

How to make a stand for the phone?

Surely you have at least one cardboard box at home. From such a throwaway material, you can create something unique. We suggest making a stand for a phone made of paper and an old box.

  1. To work, you need to prepare a clerical glue, a pencil with a ruler, a knife.
  2. Before making a stand for the phone, you need to prepare the cardboard. We cut rectangles with the size 10x20cm. We need 9 such blanks.
  3. Now you need to glue them together in three.
  4. On two we draw here such detail. This will be the sidewall of the phone support with your hands.
  5. We cut out. To make everything beautiful and the design does not lose stability, you need to put one side on the other side and check how much they are the same.
  6. We take a clerical knife and cut out a hole in the form of a rectangle.
  7. Next, you need to make a base for the stand under the phone with your own hands. We measure the width of the phone and cut out the support from the third piece. The width of the phone is the length of our rectangle. The width of the rectangle should be such that it can enter the grooves on the sides.
  8. We collect the construction. You will also need a small circle of cardboard, its diameter slightly less than the distance between the sidewalls. (photo 8)
  9. All the blanks need to be pasted with paper. This can be newspaper clippings or scrapbooking paper.
  10. To make a back, take two pencils or something similar. In the sidewalls we make holes and insert them there. On the axis, put on our circle of cardboard.
  11. Stand for your own hands is ready!

Another variant of the phone stand with your own hands

It is possible to make and more simple variant of such support from a cardboard.

  1. The author of the lesson proposes to make a stand in the form of an autumn leaf. On the printer, you need to print the image and cut out about 9 layers on the template.
  2. Each subsequent should be a couple of millimeters wider, as the edge will slightly decrease when bending. To do this, select the middle of the vertical lines and slightly extend the side parts.
  3. The base consists of circles. Need to cut 9 layers.
  4. Separately, we glue the base and the stand itself and allow it to dry for at least two hours.
  5. The edges need to be trimmed with a stationery knife and covered with a strip of velvet or other material.
  6. We fix on the base stand and fix the load at night.
  7. In a day the stand is ready.

Such phone stands, made with their own hands, can also become original gifts to relatives.