Parents of boys know exactly - no matter how old a boy, in his heart he is still a great commander. And what kind of battles can there be without a full-fledged army? Today we will tell you how to equip the army of a small general with real tanks, making them with their own hands of paper. There are a lot of ways to make a tank of paper, starting from the application and ending with a model made of paper and cardboard of a real military tank, made on a reduced scale, but we will make a homemade tank in origami and cardboard technique.
We make a tank of paper - instruction
- For the craft, we need a sheet of ordinary office paper medium density A4 size.
- We tear off a strip about 4-5 cm wide from the short side of the sheet.
- Bend the right upper corner of the strip to get a triangle.
- We bend the top of the sheet.
- We bend the top of the strip in the triangle in the other direction.
- We get a strip of paper with clear fold lines at the top.
- Using the planned fold lines, turn the top of the strip with a pyramid.
- Press the pyramid to fix it well in the folded state.
- In the same way, we turn off the pyramid in the lower part of the strip.
- Now it is necessary to bend the outer details of the pyramid - the "ears" upwards.
- We bend the pyramid bent upwards to the right.
- Bend the left edge of the strip inside.
- Then bend the folded edge of the paper strip halfway outward.
- Repeat these operations on the other side of the strip.
- As a result, we get here a strip of paper with arrow-pyramids on both sides.
- We unfold the pyramid at the top of the strip and turn it inward in the other direction.
- We turn the resulting part to the other side.
- Bend the lower pyramid to the middle.
- Now bend the upper pyramid until it touches the bottom.
- Now we work with the lower ears.
- We insert one pyramid in another.
- We get here such a construction.
- We fix it by bending the ears.
- Straighten the "ears" of the upper pyramid.
- We bend all the "ears" of the upper pyramid inward.
- Now our tank has a tower!
- We pass to the caterpillars.
- Straighten the bent part of the strip to give the volume of caterpillars.
- Carefully straighten the tank from all sides, including the tower.
- What kind of tank without a barrel? For him, we need a small piece of paper, about 4 * 4 cm in size.
- Fold the paper into a tight tube with a thickening at the end.
- Gently lifting the tower of the tank, we get a place to fix the barrel.
- In the end we get here such a wonderful tank!
We make a tank of cardboard - instruction
- We will prepare the necessary tools and materials: PVA glue, epoxy adhesive, clerical knife and scissors.
- Details will be cut out from a cardboard box of the appropriate size.
- The base of the tank will be a rectangle cut from the box with a square hole cut in the middle of the tower.
- For caterpillars we will cut rectangles with pointed ends from cardboard.
- Also we cut out the side details of the base.
- We glue the side walls to the base part.
- The tower is also made of a rectangular piece of cardboard.
- And we will make the barrel of a tank triangular.
- We glue to the base of the caterpillar.
- We get here such a wonderful tank . For greater realism, it can be pasted with colored paper or painted with acrylic paints.