Many have faced the problem of wetting a portable device, but not everyone knows what to do if the phone has fallen into the water. Suffered from inaccuracy and carelessness of the owner of the means of communication can be saved, if immediately carry out some activities, resuscit mobile phones.
Is it possible to restore the phone after the water?
If someone else does not know what to do, if the phone has fallen into the water, then it should be recalled that it must be immediately removed from there. It takes a few seconds for the water to penetrate all the holes, including the buttons. If the phone fell into the water and lay there for a long time, the chances of saving it are almost zero. To restore the device, you may need to replace many components:
- processor;
- microcircuits;
- peripheral devices;
- random access memory.
Some modern mobile devices are equipped in such a way that water is not terrible for them. Most of the others may require replacement of one of the components, which has suffered more. According to statistics, after flooding the phone most suffer touch screens, because their mechanisms are very sensitive to all mechanical influences.
What should I do if water gets into the phone?
Even with a strong flood, in a situation where the phone got into the water and does not turn on, there are chances to save it. The following procedures must be performed without fail:
- Remove the battery and put it in a warm and dry place.
- Completely disassemble the phone as much as possible, pulling out the flash and sim cards.
- Dry them in a warm place for at least three days.
Experts know more about how to dry the phone from water and advise to rinse the components with distilled water. This procedure is carried out only by professionals, and without special devices it is possible simply to break the mobile device. Some components are stacked for several hours in alcohol, to get rid of corrosion, but this procedure is assigned only after computer diagnostics.
The phone fell into the water - the sensor does not work
If the touch phone fell into the water, what should I do? Many users of mobile devices have encountered this problem. Water entering the machine can completely disable it, but some actions can save it. The sensor is not the main component of the mobile and it can be restored in two ways:
- Full replacement touch screen with a touchscreen.
- Cleaning of trains and mechanisms with a special solution.
Cleaning the sensor for a phone that has fallen into the water is not very productive, since in the future it can affect its operation. Replacement of individual parts also will not bring a result, according to statistics such problems again make themselves felt after a few months. A full replacement will ensure trouble-free operation, and will update an important part of the device, which unfortunately suffers in the first place.
The phone fell into the water - the speaker does not work
For a modern person, be sure to know how to restore the phone after the water. In the dynamics of moisture gets very quickly, but to restore their work much easier. To conduct serious measures in most cases is not required, you just need to dry it right:
- put for several days in rice;
- blow dry in the cold air;
- leave at room temperature in idle mode.
It is worth remembering that you can not overdo it with rehabilitative measures. Hot air can seriously damage any device, because all internal chips are very sensitive to any external influences and can just melt. In no case should it not be put in salt, because in a short time it corrodes all important details. Do not advise to leave the damaged apparatus near the batteries and even more so on it.
The phone fell into the water and did not turn on
The standard situation when the phone after the water does not turn on happened to many. Do not panic and run after a new smartphone, because this phenomenon can be temporary. The main thing is to dry the device at room temperature for a long time and then, if the vital details do not have time to oxidize, it will work. There are some exceptions in which it is necessary to refer the device to a service center:
- after three days the phone did not work;
- Enabled, but works intermittently;
- traces of oxidation and corrosion are visible on the internal parts.
Knowing how to dry the phone that fell into the water, the person will have the opportunity to avoid unforeseen costs. The main thing is to avoid gross mistakes:
- do not disassemble without special skills;
- Do not dry at elevated temperatures;
- Do not include the mobile if it was turned off.
The phone fell into the water and did not charge
Many are interested in the question of what to do if the phone fell into the water and stopped charging. There is a high probability that when you get wet in the phone, only one circuit is closed, which is not difficult to replace. You should not do this yourself, it's better to give the device to a service center, especially since the procedure is not too expensive. At home, only standard drying is required.
Cleaning the phone after water at home requires a long time and so you should wait at least three days before connecting it to the network. Be sure to pay attention to the battery itself, because when it hits the water it can break down and then the problem will not be at all in charging. In this case, the probability of failure is reduced to 50/50.
The phone hit the water - the screen does not work
The screen is the main part of the smartphone and if the water gets under the screen of the phone, then it can harm all the components. Distortions on the screen appear in the investigation:
- wetting boards;
- breakdown of the touch screen;
- corrosion of loops.
Get rid of the problem by wiping all the chips with alcohol. The best result can be achieved if you replace the sensor with a new one, after all, even after thorough cleaning at home, the screen may leave a trace. Obligatory replacement of the screen is required in case of contact with sea water, with a large amount of salt. Before replacing, make sure that the problem is in the screen, not in the loop or connector.
The phone fell into the water and vibrates
Constant vibration even when the machine is turned off speaks of a short circuit. How to reanimate the phone after the water in this situation? It is believed that it is better to leave the repair work and purchase a new model. Nevertheless, it is worth trying to carry out some activities that may help.
- Complete and thorough cleaning with alcohol and distilled water.
- Replacement of burnt out components.
- Complete computer diagnostics to avoid further problems.
The phone fell into the water and the microphone does not work
The difficult recovery of the phone after the water touches and microphones. This detail is inexpensive, but its replacement is not a very pleasant procedure, especially making it all yourself without certain skills is almost impossible. Experts advise to dry the phone with rice, if the problem is only in it. Ninety percent of the time the problem is eliminated with moisture.
The phone got water, what should I do?
The camera, like the screen and drying the phone after the water in this case should be no less thorough. If there is moisture under the screen, which is visible to the naked eye, do not check it for performance. If possible, you should disassemble the phone, and wipe all the accessories. The camera has many different glasses and lenses and without having the experience of doing it yourself is not recommended.