Owners of dachas, fenced net mesh, often ask the question: how can you decorate a fence? After all, if you even paint it, it will still not be very noticeable. One option is planting various plants along it, but this only helps during spring and summer.
From this article you will learn how you can decorate the fence in the country house from the mesh netting with your own hands with the help of plastic bottle caps.
Master class - snowman from the caps
Materials:
- plastic caps of different colors;
- a coil of wire with a diameter of 1 mm;
- felt-tip pen and pen;
- acetone;
- wet wipes.
Instruments:
- round pliers;
- awl;
- nippers.
To make a snowman, we take a scheme for embroidering with a cross or beads with a suitable image.
Performance:
- In order to correctly calculate the number of lids of a certain color and in the future not to get lost in them, in the figure we number all the vertical rows. Then we sign each cap (put the number of the series on the inside) or only the first one and lay them out on separate bags.
- In each lid we make a hole in the hole with 4 holes. To not injure an arm, to hold it it is necessary as follows.
- We have 2 red covers in the first row. We string them on the wire. Then the lower end (about 4-5 cm) round-bends turn into a loop.
- Stepping back from the top 4-5 cm, we snack the wire and turn it into a loop.
- In the same way, we dial the 2 nd, 3 rd, 4 th and all the other ranks.
- Now we need to fix them horizontally. We take the rows from the 14th to the 18th (the highest), we fasten the very first caps with wire across. At both ends, we leave 4-5 cm of wire, which are rounded into loops.
- Now we attach the 13th row and thread the second lids across the wire, fixing it on both sides.
- Acting in this way, we collect the whole figure of the snowman.
- After the whole figure is ready, moisten the dried wipe with acetone and wipe off the inscriptions on the outside of the caps.
- In order to fix the snowman to the fence, it is necessary to bend the loops of the wire available at the ends of the rows and twist around the mesh. You can add a snowman's figure to a white cloud with snow.
| | | |
| | | |
| | | |
| | |
| | |
| | |
