A skirt in the floor - an indispensable attribute in the wardrobe of every fashionista. This is a stylish thing that will emphasize femininity add to the image of mystery and mystery. Particularly relevant are Maxi in the summer - light flowing fabric does not constrain movement and allows a woman not only to be attractive, but also not to experience the slightest comfort - according to this parameter correctly sewn maxi from light fabric, even beloved trousers went around.
In view of all of the above, I really want to have such skirts in the wardrobe at least a few. But if nothing of the offered in stores and the market you are not "invigorated" or you just have financial constraints, you can easily sew a skirt to the floor with your own hands. This is not difficult to do, since the idea itself is extremely simple, so in the majority of cases it does not require even a pattern for sewing long skirts into the floor. All that you need: a matching fabric, sewing accessories and a little bit of zeal.
How to sew a skirt in the floor: a master class
This extremely simple guide will allow you to quickly and simply sew a stylish and beautiful thing. This skirt is suitable for almost any type of figure, emphasizing advantages and hiding shortcomings, and will give an image of lightness.
We need:
- light knitted fabric;
- wide underwear elastic band;
- safety pins;
- thread;
- sewing machine.
Sew a skirt in the floor
- We take a piece of fabric of arbitrary width and length. The length of the skirt will be adjusted depending on your height, as to the width - it should be sufficient to slightly attach the fabric at the top - then it will beautifully fall down. For a basis also it is necessary to take measurements, but now - volume of hips.
- Fold the fabric in half, the front sides inside, fix the pins.
- We cut through the fold, we get two identical rectangles.
- We spend it on the lateral seams.
- We get two rectangles stitched from both sides.
- Determine the upper and lower parts. The lower part also needs to be trimmed - bending the fabric and laying a line.
- We measure the desired length of the rubber band so that it does not strongly clamp the waist.
- At the top, we fold the fabric in such a way that a pre-prepared wide rubber band enters it. We spend it, leaving a small gap of fabric unshaved so that you can put the elastic band there.
- We insert an elastic band, sew its ends, sew a previously left gap.
- A stylish skirt on the floor with your own hands is ready.
| | |
| | |
| | | |
| | | |
| | | |
