Soft, well-groomed feet are the indicator of the woman's attitude towards herself and the guarantee of her good mood! Due to the fact that the skin on the feet is very dense, and it takes a maximum of loads (walking, contact with shoes, lack of air, exposure to bacteria), the procedure of pedicure causes a lot of difficulties. Coping with "natoptyshami" and rough heels by means of good old pumice after steaming legs in hot water is not always possible. A modern alternative to this old way of caring for the feet is a hardware pedicure that has already earned respect in the eyes of many women.
Feature Procedure
The main difference between the hardware pedicure is the nozzles, which are used instead of the usual instruments and a pebble. They put on a special machine that rotates the shaft at high speed. Thanks to the contact of the abrasive material, from which the hardware pedicure cutters are made, to the skin, the dead cells of the epidermis are removed and the feet become soft and smooth.
Classify the nozzles into two groups: for feet and for nails. The set includes mills of different size and different abrasiveness. Another feature of the hardware pedicure is that the legs do not wet - the whole procedure is performed "on dry", and moistening of the skin and cleansing it is achieved through the use of special tools.
Hardware medical pedicure
Cleaning the feet not only ennobles the appearance of the legs, but also allows you to identify problems with various organs, which are responsible for thousands of active points located on the legs.
This is done by doctors podologi - in the elite salons the pedicure is done by the masters with such medical education. Podopolog also cures various curvatures of the foot, such as, for example, valgus deformity, flat feet, diabetic foot, tarsal tunnel syndrome, etc.
Technology of pedicure
Consider the sequence in which the procedure is performed in the salon. Having adopted this algorithm, the hardware pedicure can be done at home, pre-acquired a special machine.
- The foot is cleaned with a skin antiseptic, wiped dry.
- If necessary, cut the nails.
- Apply a special gel (cutaneous softener or keratolytic) and give it an effect (4 - 10 minutes).
- After removing the remnants of the gel proceed to the actual apparatus pedicure. The roughest cutter (abrasivity 60/60) processes the surface of the foot, removing the " burrs ".
- A fine abrasive nozzle (100/100) polishes the skin of the foot - it should become smooth and pink.
- Remains of dust are removed and proceed to polishing the skin between the fingers, using a medium-grain ceramic nozzle in the form of a truncated cone.
- The skin between the fingers is polished with a fine-grained nozzle. The dust is removed.
- The same nozzle is treated with okolonogtevye rollers, pretreated with a softener cuticle.
- Actually the cuticle is pushed at a shallow speed by a diamond nozzle with a ball at the end.
- Do the polishing of the nails, treating them with oil for the cuticle . The final glossiness of the nails is attached to the felt attachment.
Knowing how to properly do a hardware pedicure, you can hold it at home.
Selection of machine
Machine-mills differ in this indicator, as the number of revolutions. Professionals use high-speed devices with a built-in "vacuum cleaner", pulling in the detached particles. For home use less powerful machines are suitable, but the number of revolutions should not be less than 30,000 rpm, otherwise grinding will not work. Before you do a hardware pedicure with your own hands, you need to practice at the lowest speed, so as not to get injured and get involved.