Bracelet from earphones

Teenagers like to listen to music through headphones and wear interesting bracelets made by themselves. And in order for the broken old headphones not to collect dust on the shelves, you can make a bracelet from them. There are several options, as it can be done, and we'll look at them in our master classes.

Master class 1: how to make a bracelet from the wires from the headphones

It will take:

• wires from the headphones;
• soldering iron;
• fasteners for the bracelet: a lock and 2 metal tubes.

Progress:

1. Remove the plastic sheath from the headphone cord to strip 4 copper wires. The plug is not cut off immediately so that they do not disintegrate.
2. We begin to interweave them among themselves, like a pigtail to the very end of the wiring, fixing the beginning of the wire.
3. We measure the arm circumference on which we make the bracelet. We divide the braided plaited piece into parts equal to the arm circumference, and immediately solder at both ends. Usually we get 4 parts.
4. We connect all four parts with each other. We put metal tubes on the connected ends. Gently solder to the bracelet rings to lock.
5. Our bracelet from the wires from the headphones is ready.

Master class 2: bracelet from the headphones with your own hands.

It will take:

• Defective headphones.

1. If the two wires are glued together, they must be separated from the headphones to the plug.
2. We measure the arm circumference to know how much it will be necessary to weave. At this distance, make a loop of wires, a volume so that it can easily enter the headphone speakers.
3. Put the loop back up. We take the right double wire and we put vertically from above to the left one, so that the window will turn out. From below we put the right wire into this window. Stretching both wires in different directions, tighten the knot.
4. Repeat this knot to the very end of the wire.
5. Our bracelet is ready.

To ensure that the bracelet does not fall off your hand, it is necessary to pass the plugs into the first loop of the speakers and the plug.

To create bracelets from old headphones, you can also use the patterns of weaving in the technique of macrame.

Master class 3: braided bracelet from old headphones

It will take:

• wires from black headphones - 2pcs;
• pencil.

1. We will bracelet in the technique of macrame, performing a flat knot.
2. First, on the pencil, making 2 loops, attach our wires.
3. For convenience, we number the wires from left to right in order 1, 2, 3, 4.
4. We make the knot like this: take the right wire (# 4), put it on top of wires # 2,3, and put the left one (# 1) on No. 4, take it off at No. 2,3 and put it in the loop (under No. 4). The resulting node is tightened. Then we take the left wire (No. 1) and repeat all the same movements.
5. Alternating the nodes made with wires # 4 and # 1, we make them to the end of the wires and get a braided bracelet.

Using your imagination and already sort of unnecessary things like broken headphones, you can make interesting bracelets. A complement to them can be a ring made from a coin .